Dome Lamp - Chevrolet Metro 1999 Owner's Manual

Center High-Mounted Stoplamp
(2-Door Model)
1. Remove the two mounting screws and then the lamp
assembly from the hatchback door.
2. Remove the bulb from the socket.
3. Replace the bulb with a new one and then use the
two mounting screws to secure the lamp assembly
into place.
Center High-Mounted Stoplamp
(4-Door Model)
1. Open the rear compartment lid.
2. Remove the bulb socket from the underside of the
- -
rear seat to rear window panel.
3. Twist the bulb to the right and pull it straight out.
4. Replace the bulb with a new one and then snap and
turn the bulb socket into the lamp housing.
Rear Parking/Sidemarker Lamps
(2-Door Model)
1. Remove the rear combination lamp assembly as
described under "Rear Combination Lamps" earlier
in this section.
2. Turn the socket to the left and gently pull the socket
out of the assembly.
3. Pull the old bulb straight up to remove it.
4. Reverse the steps to install a new bulb.

Dome Lamp

1. Gently pry the dome lamp lens from the dome lamp
-
assembly with a flat head screwdriver.
2. Pull the old bulb out.
3. Replace the bulb and snap the cover back into place.
yellowblue
6-39