Ford F-150 2001 Workshop Manual page 9

2001 F-150 Workshop Manual
13. Install the throttle body adapter and the four bolts. Tighten the bolts in two stages.
Stage 1: Tighten to 10 Nm 89 (lb-in).
Stage 2: Tighten an additional 90 degrees.
14. Install the EGR valve to exhaust manifold tube.
Hand-tighten the fittings.
Tighten the upper fitting.
Tighten the lower fitting.
Connect the two differential pressure feedback EGR sensor hoses.
15. Connect the idle air control motor.
16. Connect the fuel lines. For additional information, refer to
17. Install the nut.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS11/~MUS~LEN/19/S...
Section 310-00A (Gasoline), Section 310-00B (NGV) or Section 310-00C (Bi-Fuel).
Page 9 of 12
5/29/2010