2001 F-150 Workshop Manual
15. Disconnect the differential pressure feedback EGR.
16. Remove the bolt and disconnect the brake booster vacuum line and bracket.
17. Remove the nut.
18. Disconnect the fuel lines. For additional information, refer to
19. Disconnect the idle air control (IAC) motor electrical connector.
20. Position the EGR valve to exhaust manifold tube aside.
Disconnect the upper fitting.
Loosen the lower fitting.
Disconnect the two differential pressure feedback EGR sensor hoses.
Position the tube aside.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS11/~MUS~LEN/19/S...
Section 310-00A(Gasoline)Section 310-00B
(NGV) or
Section 310-00C
(Bi-Fuel).
Page 3 of 12
5/29/2010