Display Contrast; Display Brightness; Standby; Buzzer - Miele PT 5135 C Operating And Installation Instructions

Display contrast

Display brightness

There are ten different display
contrast and display brightness
settings.
The bar chart shows you the setting.

Standby

To save energy, the display goes out
after 10 minutes and the Start button
flashes slowly.
On
Standby is activated:
– if a programme is not selected.
– if the Start button has been pressed.
– at the end of a programme.
Not in current Prog.
(the machine is delivered with this
option selected)
Standby is activated:
– if a programme is not selected.
Pressing one of the buttons switches
the display back on again.
Settings menu J

Buzzer

When the buzzer function has been
activated, an audible tone sounds at
the end of a programme.
The buzzer will still sound if there is a
fault, even if it has been deactivated.
Off
The machine is delivered with the
buzzer deactivated.
Normal
The buzzer sounds at the end of a
programme.
Loud
The buzzer sounds at maximum volume
at the end of a programme.
Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to
handle.
The bar chart shows you the setting.
The machine is delivered with 0 mins
(normal cooling down period) set as
standard.
– The programme duration will
increase accordingly.
You cannot extend the cooling down
time for the Warm air, Cool air, Woollens
handcare or Smoothing programmes.
45