Settings/Supervisor Level Menu - Miele PT 5135 C Operating And Installation Instructions

Settings/Supervisor level menu

The Settings/Supervisor level is
locked with a code to prevent it being
accessed by unauthorised personnel
(the Language J setting can still be
altered).
C Back A
F Language F
Supervisor level
^ Open the Supervisor level sub-menu
To enter the code
C Back A
X Access via code
Change code
^ Confirm Please enter code .
You will now be asked to enter a
3-figure code. The code is set at 000 at
the factory.
0 0
Enter code
^ Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now set the second number.
^ Repeat the process until all three
numbers have been entered.
^ Confirm the code with the OK button,
or if you want to correct a mistake
press the – button.
46
0
Supervisor level
Change code
You can alter the access code to the
supervisor level.
^ Enter the old code.
^ Enter a new code.
After entering the new code the display
will revert to the entry menu after a
short while.
Drying levels
The bar chart shows you the setting.
The machine is delivered with a
medium setting set as standard.
– Depending on the setting, the
programme duration will be shorter
(damper) or longer (drier).
Cottons and Minimum iron
You can alter the drying levels for the
Cottons and Minimum iron
programmes.
Cottons Machine iron
This drying level can be altered
independently.