Table of Contents
Advertisement
12) Front Storage
Compartment Cover
Latch
Pull the latch lever upward in order to
open the front storage compartment
cover. Always relatch.
NOTE: Verify periodically the lock pin
tightness of storage cover. Tighten if
needed and make sure storage cover
latches properly.
13) Side Storage
Compartments
Two convenient watertight compart-
ments to carry personal articles. Ideal
location for water skis or wakeboards.
Left side storage compartment is also
provided with a holder. Tool kit is insert-
ed in that holder.
WARNING
Never leave any heavy or break-
able objects loose in the storage
compartment. Never operate the
craft with the storage compart-
ment cover open.
14) Underseat Storage
Compartments
Convenient watertight, removable bas-
ket to carry personal articles. Remove
seat to gain access to underseat stor-
age compartments.
WARNING
Never leave any heavy or break-
able objects loose in the storage
compartment. Never operate the
craft with the storage compart-
ment cover open.
15) Tool Kit
Contains tools needed to perform basic
watercraft maintenance.
16) Air Intake Opening
This is where air enters to supply the
engine and to ventilate the engine com-
partment. If the air intake opening is
kept under water, water will get inside
bilge.
CAUTION: If the air intake opening
is kept under water, such as turning
constantly in tight circles, water will
get inside bilge, which may cause
severe damage to internal parts of
the engine.
17) Seat Strap
The seat strap provides a handhold to
assist boarding and is used as a hand-
hold for the passenger.
18) Seat Latch
Removing the seat allows access to
the engine compartment.
The seat latch is located at the rear end
and underneath the seat.
1
F17L0EY
TYPICAL
1. Seat latch
To remove seat, pull the latch lever up-
ward and hold. Lift and pull the seat
rearward.
NOTE: It is necessary to remove the
seat extension first and repeat the
same procedure to remove the seat.
33
Advertisement
Table of Contents
