Using And Replacing The Light Bulbs - Whirlpool RF398PXP Use And Care Manual

Electric range
Hide thumbs Also See for RF398PXP:
Table of Contents

Advertisement

Using and Replacing the Light Bulbs
The Cooktop light
The fluorescent
top light is under the control
panel. The
Top light
switch is on the
control panel. Push it in and hold it for a second
or two to turn on the top light.
Push it again
to turn it off.
1.
Turn off the electric
power at the
maln power supply.
Flip up the top of the control
panel.
The Oven Light
2. Grasp the fluorescent
tube at both
ends. Turn the tube away
from you
until both ends come out of the
receptacles.
Replace
with a 20-
watt cool-white
fluorescent
tube.
Close the top panel.
Turn electric
power
back on at
the main power supply.
The oven light will come on when you open the oven door. To turn the light on
when the oven door is closed,
DUSh the
Oven light
switch on the control
panel.
Push it again
to turn off the light.
1.
Turn ott the electric
power at the
maln power supply.
Remove the bulb cover in the back
of the oven by pulling
out and Dush-
ing the wire holder to the side.
2. Remove the light bulb from its
socket. Replace
the bulb with a
40-watt appliance
bulb.
Replace
the bulb cover and snap
the wire holder in place.
Turn the power
back on at the
main power
supply.
CAUTION: The bulb cover must be In place when uslng the oven. me cover
protects the bulb tram breaklng.
24

Advertisement

Table of Contents
loading

Table of Contents