Filling Station Information - Mercury Mountaineer 2000 Owner's Manual

Filling station information

Item
Required fuel
Fuel tank capacity
Engine oil capacity (includes filter
change)
Tire size and pressure
Hood release
Coolant capacity-
(4.0L SOHC V6 engine)
Coolant capacity (5.0L V8 engine)
Power steering fluid capacity
Automatic transmission fluid capacity
(4R70W with 5.0L V8 engine AWD)
Automatic transmission fluid capacity
(4x2 vehicles with 5R55E and 4.0L
SOHC V6 engine)
Automatic transmission fluid capacity
(4x4 vehicles with 5R55E and 4.0L
SOHC V6 engine)
1
Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford
Extended Life Engine Coolant (orange in color). Refer to Adding engine
coolant, in the Maintenance and Care chapter.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON and MERCON V are not interchangeable. DO NOT
mix MERCON and MERCON V. Refer to your Scheduled Maintenance
Guide to determine the correct service interval.
3
Indicates only approximate dry-fill capacity. Some applications may
vary based on cooler size and if equipped with in-tank cooler. The
amount of transmission fluid and fluid level should be set by the
indication on the dipstick's normal operating range.
264
1
2
2
Information
Unleaded fuel only - 87 octane
75.5L (21.0 gallons)
4.7L (5.0 quarts). Use
Motorcraft SAE 5W-30 Super
Premium Motor Oil, Ford
specification WSS-M2C153-G.
Refer to the Certification Label
on inside of driver's door.
Pull handle under the
instrument panel.
13.2L (14.0 quarts)
1
14.9L (15.7 quarts)
Fill to line on reservoir. Use
Motorcraft MERCON ATF.
13.1L (13.9 quarts). Use
2
Motorcraft MERCON V ATF.
9.5L (10.0 quarts). Use
Motorcraft MERCON V ATF.
9.8L (10.3 quarts). Use
Motorcraft MERCON V ATF.
3
3
3