1. Manuals
  2. Brands
  3. Mercury Manuals
  4. Automobile
  5. 1996 Grand Marquis
  6. Manual

Mercury 1996 Grand Marquis Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Mercury 1996 Grand Marquis

Summary of Contents for Mercury 1996 Grand Marquis

  • Page 3: Table Of Contents

    Table of Contents Introductory Information ... 1 Safety Restraints ... 7 Starting Your Grand Marquis ... 37 Warning Lights and Gauges ... 47 Instrument Panel Controls ... 87 Steering Column Controls ... 111 Features ... 123 Electronic Sound Systems ... 149 Driving Your Grand Marquis ...

  • Page 4: Introductory Information

    Introductory Information Ford’s Commitment to You Our Guiding Principles Quality comes first. For your satisfaction, the quality of our products and services must be our number one priority. You are the focus of everything we do. Our work must be done with you in mind, providing better products and services than our competition.
  • Page 5 Things to Know About Using This Guide Congratulations on the purchase of your new vehicle. This guide has information about the equipment and the options for your new vehicle. You may not have bought all of the options available to you. If you do not know which information applies to your vehicle, talk to your dealer.
  • Page 6 The Quick Index at the end of the book provides a page number following each item which indicates where detailed information can be found. To use the Index, turn to the back of the book and search in the alphabetical listing for the word that best describes the information you need.
  • Page 7 If you lose your Warranty Information Booklet, you can get a new one free of charge. Contact any Ford or Lincoln-Mercury dealer, or refer to the addresses and phone numbers on the first page of this owner guide. Buying a Ford Extended Service Plan If you bought your vehicle in the U.S., you can...
  • Page 8 The break-in period for new brake linings lasts for 100 miles (160 km) of city driving or 1,000 miles (1,600 km) of highway driving. Use only the type of engine oil that Ford recommends. See Engine oil recommendations in the Index. Do not use special “break-in” oils.
  • Page 9 Washing and Polishing Your Vehicle Wash the outside of your vehicle, including the underside, with a mild detergent. DO NOT: Wash your vehicle with hot water Wash your vehicle while it sits in direct sunlight Wash your vehicle while the body is hot Polish your vehicle to remove harmful deposits and protect the finish.

  • Page 10: Safety Restraints

    Safety Restraints Important Safety Belt Information The use of safety belts helps to restrain you and your passengers in case of a collision. In most states and in Canada the law requires their use. Safety belts provide best restraint when: the seatback is upright the occupant is sitting upright (not slouched) the lap belt is snug and low on the hips...
  • Page 11 RWARNING Never wear the shoulder belt under the arm. Never swing it around the neck over the inside shoulder. Never use a single belt for more than one person or across more than one seating position. Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair.

  • Page 12: Combination Lap And Shoulder Belts

    Combination Lap and Shoulder Belts While your vehicle is in motion, the combination lap and shoulder belt adjusts to your movement. However, if you brake hard, corner hard or if your vehicle receives an impact of 5 mph (8 km/h) or more, the lap and shoulder belt locks and helps reduce your forward movement.
  • Page 13 Fastening the rear seat combination lap and shoulder belt NOTE: Be sure to read and understand Important Safety Belt Information at the beginning of this chapter. Safety Belts for All Passenger Outboard Seating Positions Your vehicle is equipped with a dual locking mode retractor on the shoulder belt portion of the combination lap/shoulder safety belt for the front and rear outboard passenger seats.
  • Page 14 Automatic locking mode In this operating mode, the shoulder belt retractor will be automatically locked and remain locked when the combination lap/shoulder safety belt is buckled, and does not allow the occupant freedom of movement. This mode provides the following: A tight lap/shoulder belt fit on the occupant.
  • Page 15 NOTE: When the combination lap/shoulder belt is unbuckled and allowed to retract completely, the retractor will switch back to the vehicle sensitive (emergency) locking mode. See the detailed instructions under Safety Seats for Children in this chapter. Shoulder Belt Height Adjustment Driver and right front passenger You can adjust the shoulder belt height to one of five (5) positions.
  • Page 16 The shoulder belt height adjuster The shoulder belt height adjuster RWARNING The lap belts should fit snugly and as low as possible around the hips, not around the waist.
  • Page 17 RWARNING All front and rear seat outboard occupants (including pregnant women) should wear lap and shoulder belts, for optimum protection in a collision. RWARNING Failure to follow these precautions could increase the risk and/or severity of injury in a collision. 1) Use the shoulder belt on the outside shoulder only.
  • Page 18 Lap Belts — Center Seating Positions The lap belts in the center of the front and rear seats do not adjust automatically. You must adjust them to fit snugly and as low as possible around your hips. Do not wear them around your waist.

  • Page 19: Safety Belt Maintenance

    Safety Belt Extension Assembly For some people, the safety belt may be too short even when it is fully extended. You can add about eight inches (20 cm) to the belt length with a safety belt extension assembly (part number 611C22). Safety belt extensions are available at no cost from your dealer.
  • Page 20 operate properly, they do not need to be replaced. Safety belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted. Cleaning the Safety Belts Clean the safety belts with any mild soap solution that is recommended for cleaning upholstery or carpets.
  • Page 21 There are four very important reasons to use safety belts even with an air bag system. Use your safety belts to: help keep you in the proper position (away from the air bag) when it inflates reduce the risk of harm in rollover, side or rear impact collisions, because an air bag is not designed to inflate in such situations reduce the risk of harm in frontal collisions...
  • Page 22 In rear-facing infant seats, the infant’s head is closer to the air bag. The force of the rapidly inflating air bag could push the top of the rear-facing seat against the vehicle seatback, center console (if so equipped), or center armrests (if so equipped).
  • Page 23 RWARNING Do not place objects or mount equipment on or near the air bag cover on the steering wheel or in front seat areas that may come in contact with a deploying air bag. Failure to follow this instruction may increase the risk of personal injury in the event of a collision.
  • Page 24 The location of the air bag and warning labels If a collision occurs, the sensors sense the severity of the impact and activates the air bags if necessary. The air bag system is designed to deploy in frontal and front-angled collisions more severe than hitting a parked vehicle (of similar size and weight) head-on at about 28 mph (45 km/h).
  • Page 25 RWARNING Air bag system components get hot after inflation. Do not touch them after inflation. Inflated driver side air bag...
  • Page 26 Inflated right front passenger side air bag RWARNING If the air bag is inflated, THE AIR BAG WILL NOT FUNCTION AGAIN AND MUST BE REPLACED IMMEDIATELY. If the air bag is not replaced, the unrepaired area will increase the risk of injury in a collision.

  • Page 27: Safety Restraints For Children

    If any of these things happen, have the air bag system serviced at your Ford or Lincoln-Mercury dealer immediately. Unless serviced, the air bag supplemental restraint system may not function properly in the event of a collision.
  • Page 28 RWARNING Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision. RWARNING Passengers should not be allowed to ride in the cargo area. Persons not riding in a seat with a fastened seat belt are much more likely to suffer serious injury in a collision.
  • Page 29 For more information on top tether straps see your Ford or Lincoln-Mercury dealer. When installing a child safety seat, be sure to use the correct safety belt buckle for that seating position, and make sure the tongue is securely fastened in the buckle.
  • Page 30 Children weighing less than 40 lbs. (18 kg) should use child or infant seats. Forward facing child seats must have the passenger seat moved as far back from the instrument panel as possible. RWARNING REAR-FACING INFANT SEATS SHOULD NEVER BE USED IN THE FRONT SEAT. REAR-FACING INFANT SEATS MUST ALWAYS BE PLACED IN THE REAR SEAT.
  • Page 31 Installing Safety Seats in the Front and Rear Outboard Passenger Seating Positions For seating positions equipped with a dual locking mode retractor, use the following procedure. If you choose to install a child safety seat or infant carrier in the front seating positions, move vehicle seat as far back as possible.
  • Page 32 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat manufacturer’s instructions. See Figure 2. Be sure that the belt webbing is not twisted. Routing the lap/shoulder belt...
  • Page 33 4. Insert the belt tongue into the buckle for that seating position until you hear and feel the latch engage. Figure 3. Make sure tongue is latched securely to buckle by pulling on tongue. Buckling the belt...
  • Page 34 5. Grasp the shoulder portion of the belt and pull downward until all of the belt is extracted and a click is heard. At this time, the retractor is in the automatic locking mode (child seat restraint mode). Figure 4. NOTE: The dual-locking mode retractor must be in the automatic locking mode to properly restrain a child.
  • Page 36 7. Before placing the child in the child seat, forcibly tilt the seat from side to side, and tug it forward to make sure that the seat is securely held in place, Figure 7. Checking that the seat is secure 8.
  • Page 37 Checking the retractor 9. Check to make sure that the child seat is properly secured prior to each use. If the retractor is not locked, repeat steps 4 through 7. Installing a Child Safety Seat at the Rear Center Seating Position with Adjustable Lap Belt 1.
  • Page 38 4. Insert the belt tongue into the proper buckle for the center seating position until you hear a snap and feel it latch. Make sure the tongue is securely fastened to the buckle by pulling on tongue. 5. Push down on the child seat while pulling on the loose end of the lap belt webbing to tighten the belt.
  • Page 39 RWARNING If the shoulder belt cannot be properly positioned, the child should sit in the center rear seat and use the lap belt or, if that seat is unavailable, in the center front seat and use the lap belt. To improve the fit of lap and shoulder belts on children who have outgrown child safety seats, Ford recommends use of a belt-positioning booster seat that is labelled as conforming to all...

  • Page 40: Starting Your Grand Marquis

    Starting Your Grand Marquis Ignition Understanding the Positions of the Ignition The positions of the key in the ignition ACCESSORY allows some of your vehicle’s electrical accessories such as the radio and the windshield wipers to operate while the engine is not running.
  • Page 41 START cranks the engine. Release the key once the engine starts so that you do not damage the starter. The key should return to ON when you release it. The START position also allows you to test the brake warning light. Removing the Key From the Ignition 1.

  • Page 42: Starting Your Vehicle

    Fuel-Injected Engines When starting a fuel-injected engine, the most important thing to remember is to avoid pressing down on the accelerator before or during starting. Only use the accelerator when you have problems getting your vehicle started. See Starting Your Engine in this chapter for details about when to use the accelerator while you start your vehicle.
  • Page 43 Starting Your Engine To start your engine: 1. Follow the steps under Preparing to Start Your Vehicle at the beginning of this section. 2. Turn the ignition key to the ON position. 3. DO NOT depress the accelerator pedal when starting your engine.
  • Page 44 Whenever you start your vehicle, release the key as soon as the engine starts. Excessive cranking could damage the starter or flood the engine. After you start the engine, let it idle for a few seconds. Keep your foot on the brake pedal and put the gearshift lever in gear.
  • Page 45 If the engine idle speed does not slow down automatically, do not allow your vehicle to idle for more than 10 minutes. Have the vehicle checked. RWARNING Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage.
  • Page 46 RWARNING To prevent electrical shock, do not use your heater with ungrounded electrical systems or two-pronged (cheater) adapters. For best results, plug the heater in at least three hours before you start your vehicle. Using the heater for longer than three hours will not damage the engine, so you can plug it in at night to start your vehicle the following morning.
  • Page 47 Have the exhaust and body ventilation systems checked whenever: your vehicle is raised for service the sound of the exhaust system changes your vehicle has been damaged in a collision Improve your ventilation by keeping all air inlet vents clear of snow, leaves, and other debris. If the engine is idling while you are stopped in an open area for long periods of time, open the windows at least one inch (2.5 cm).
  • Page 48 If the Engine Cranks but Does Not Start or Does Not Start After a Collision Fuel System Shut-off Switch If the engine cranks but does not start or does not start after a collision, the fuel system shut-off switch may have been triggered. The shut-off switch is a device intended to stop the fuel system when your vehicle has been involved in a substantial jolt.
  • Page 49 RWARNING If you see or smell fuel, do not reset the switch or try to start your vehicle. Have all the passengers get out of the vehicle and call the local fire department or a towing service. If your engine cranks but does not start after a collision or substantial jolt: 1.

  • Page 50: Warning Lights And Gauges

    Warning Lights and Gauges The instrument panel (dashboard) on your vehicle is divided into several different sections. The illustrations on the following pages show the major parts of the instrument panel that are described in this chapter. Some items shown may not be on all vehicles.
  • Page 51 The mechanical cluster...
  • Page 52 The Mechanical Cluster The following warning lights and gauges are on the mechanical cluster. All of the warning lights and gauges alert you to possible problems with your vehicle. Some of the lights listed are optional. The following sections detail what each of these indicators means.
  • Page 53 Anti-Lock Brake System Light (If equipped) This warning light will go on each time you start your vehicle. If it remains on for longer than five seconds, you should shut off your engine and restart. If the anti-lock brake light stays on, this indicates that the anti-lock feature is disabled and should receive immediate attention by a qualified service technician.
  • Page 54 RWARNING If the anti-lock brake system warning light remains on or comes on while driving, have the braking system checked by a qualified service technician as soon as possible. NOTE: If a fault occurs in the anti-lock system, and the brake warning light is not lit, the anti-lock system is disabled but normal brake function remains operational.
  • Page 55 If either of these things happen, have the air bag system serviced at your Ford or Lincoln-Mercury dealer immediately. Charging System Light...
  • Page 56 If the light stays on or comes on when the engine is running, have the electrical system checked as soon as possible. Overdrive Off Indicator This light tells you that the Transmission Control Switch (TCS) on the gearshift lever has been pushed.
  • Page 57 High Beam Light This light comes on when the headlamps are turned to high beam or when you flash the lights. Low Fuel Alert Light This light comes on when your fuel gauge indicates between 1/8 and 1/16 of a tank. Your car must be turned to ON for this light to come...
  • Page 58 Air Suspension Light (If equipped) This light tells you if the air suspension needs repair or if the air suspension switch (in the trunk on the right side) is OFF. Normally, the light will glow momentarily as you turn the ignition key to the ON position. If it glows continuously: 1.
  • Page 59 installed. Do not install these devices by tapping into or running wires close to powertrain control system wires or components. The light comes on briefly when you turn the ignition key to ON, but it should turn off when the engine starts. If the light does not come on when you turn the ignition to ON or if it comes on and stays on when you are driving, have your vehicle serviced as soon as possible.
  • Page 60 Engine Warning Light will turn off after the vehicle has completed three consecutive warm up cycles without a misfire condition occurring. A warm up cycle consists of engine start from a cold condition (engine at ambient temperature) and running until the engine reaches normal operating temperature.
  • Page 61 Fuel Gauge The fuel gauge The fuel gauge displays approximately how much fuel is in the fuel tank only when the ignition switch is ON. For proper fuel gauge indication after adding fuel, turn the ignition switch OFF while refueling the vehicle. The fuel gauge indicator may vary slightly when the vehicle is in motion.
  • Page 62 conditions, and under certain driving conditions such as, heavy stop and go traffic, or driving up hills in hot weather, for the pointer to indicate at the top of the NORMAL band. If, under any circumstances, the pointer moves above the NORMAL band, the engine is overheating and continued operation may cause engine damage.
  • Page 63 Speedometer The speedometer tells you how many miles (kilometers) per hour your vehicle is moving. Odometer The odometer tells you the total number of miles (kilometers) your vehicle has been driven. Trip Odometer If you want to track your mileage up to 999.9 miles (kilometers), use the trip odometer.
  • Page 64 The battery voltage gauge Engine Oil Pressure Gauge This gauge indicates the engine oil pressure, not the oil level. However, if your engine’s oil level is low, it could affect the oil pressure. With the engine running, the pointer should move into the NORMAL band.
  • Page 65 For more information about adding oil, see Engine Oil Recommendations in the Index. The Electronic Cluster The electronic cluster works only when your ignition is in the ON position. Each time you start your vehicle, the displays go through a self-test by flashing on and off once before the actual readings are displayed.
  • Page 66 Electronic cluster...
  • Page 67 Engine Coolant Temperature Gauge This gauge indicates the engine coolant temperature not the coolant level. If the coolant is not at its proper level or mixture, the gauge indication will not be accurate. It is identified by a thermometer symbol, an “H” (hot), and a “C” (cold).
  • Page 68 3. Let the engine cool. DO NOT REMOVE COOLANT SYSTEM FILL CAP UNTIL THE ENGINE IS COOL. 4. Check the coolant level following the instructions on checking and adding coolant to your engine, see Engine Coolant in the Index. If you do not follow these instructions, you or others could be injured.
  • Page 69 High Beam Light This light comes on when the headlamps are turned to high beam or when you flash the lights. Check Engine Warning Light The Powertrain On-Board Diagnostic II (OBD II) system consists of the hardware and software necessary to monitor the operation of the powertrain.
  • Page 70 The light comes on briefly when you turn the ignition key to ON, but it should turn off when the engine starts. If the light does not come on when you turn the ignition to ON or if it comes on and stays on when you are driving, have your vehicle serviced as soon as possible.
  • Page 71 Air Bag Supplemental Restraint System and your vehicle should be taken in for service to the nearest Lincoln-Mercury dealer as soon as possible. Unless serviced, the Air Bag Supplemental Restraint System may not function properly in...
  • Page 72 Charging System Warning Light This light comes on when you turn your ignition key from OFF to ON. The light should go out when the engine starts and the alternator begins to charge. If this light stays on or comes on while your engine is running, this tells you that your battery is not being charged and that you need to have the electrical system checked as soon as...
  • Page 73 If you lose engine oil pressure: 1. Pull off the road as soon as safely possible. 2. Shut off the engine immediately. If you do not stop the engine as soon as safely possible, severe engine damage could result. 3. Check the engine’s oil level, following the instructions on checking and adding engine oil, see Engine Oil in the Index.
  • Page 74 Speed Control Indicator Light This light comes on when the speed control system is actively maintaining the set speed. It will go off when the brakes are used or if the speed control is turned off. This light does not indicate any problems but is only a convenience to tell when the speed control is active.
  • Page 75 NOTE: At least 2.5 gallons (9.5 liters) of fuel must be added for the fuel gauge to immediately show the new level of fuel. If less than 2.5 gallons (9.5 liters) of fuel is added, the gauge will reach the new level slowly. If the fuel gauge displays only the top two bars and the bottom two bars, or, if fuel remaining or distance to empty functions display CO or CS,...
  • Page 76 A problem is indicated if the fuel gauge bar graph displays only the top two and bottom two bars and the message center display for Distance To Empty or Fuel Remaining functions display the letters “CO” or “CS”. If this happens, contact your dealer for service as soon as possible.
  • Page 77 Press the E/M (English/Metric) button located just below the message center display to show miles or kilometers. If the odometer displays the word “ERROR” contact your dealer for service. The Electronic Message Center (If equipped) Along with information the warning lights and gauges provide, the electronic message center lets you: see problems such as Door Ajar, Air...
  • Page 78 All of the message center functions are controlled by the three switches located just below the message center display: E/M — Changes the electronic instrument cluster display to read in either English or Metric units. Reset — Sets the selected function to zero (if resettable).
  • Page 79 What the message center functions can show you DIST TO EMPTY — Distance to Empty (DTE) Message center display showing the DTE function selected This function estimates how many miles or kilometers you can drive with the fuel remaining in your tank under standard driving conditions. Remember to turn off the ignition when filling up with fuel.
  • Page 80 Displayed DTE will not be equal to AVG ECON multiplied by the FUEL REMAIN value. This is because DTE is calculated using a method that takes into consideration the fuel economy of the last 500 miles (800 Km) driven. If “CO” or “CS” is displayed, this means that there is a problem with the fuel indication system and you should contact your dealer for service as soon as possible.
  • Page 81 If you calculate your average fuel economy by dividing miles traveled by gallons used, your figure may be different than displayed because Your vehicle not being perfectly level during fill-up Differences in the automatic shut-off points on the fuel pumps at service stations Variations in top-off procedure from one fill-up to another Rounding of the displayed values to the...
  • Page 82 TRIP A and TRIP B — Elapsed Distance Traveled These two functions of the message center allow you to see how far you have traveled since you last reset. Trip A and Trip B are completely independent and must be reset individually. To reset either trip feature to zero, press the RESET button while a trip distance feature (Trip A or Trip B) is displayed.
  • Page 83 Check Air Suspension Light This light glows momentarily when the ignition is turned to the ON position. With the ignition on this light will flash five (5) times and sound a tone for one (1) second, and then the light will remain on to indicate that the air suspension switch (located in the trunk on the right side) is off or to indicate a possible system fault.
  • Page 84 Overdrive Off Indicator This light tells you that the Transmission Control Switch (TCS) on the gearshift lever has been pushed. When the light is on, the transmission will not shift into overdrive. Depressing the button on the shifter will return the vehicle to “overdrive on”...
  • Page 85 Door Ajar Light If one of the doors is not completely shut, this light comes on when you turn the ignition to ON. With the ignition on this light will flash five (5) times and sound a tone for one (1) second, and then the light will remain on.
  • Page 86 Indicator Lamp Module The following warning lights are on the indicator lamp module. The following section details what each of these indicators mean. The indicator lamp module Anti-Theft System Light (If equipped) The anti-theft system light illuminates to remind you that the anti-theft system has been activated. The indicator light remains on steadily for approximately 30 seconds after the last door is closed, and then goes out.
  • Page 87 Anti-Lock Brake System Light (If equipped) This warning light will go on each time you start your vehicle. If it remains on for longer than 5 seconds, you should shut off your engine and restart. If the anti-lock brake light stays on, this indicates that the anti-lock feature is disabled and should receive immediate attention by a qualified service technician.
  • Page 88 RWARNING If the anti-lock brake system warning light remains on or comes on while driving, have the braking system checked by a qualified service technician as soon as possible. NOTE: If a fault occurs in the anti-lock system, and the brake warning light is not lit, the anti-lock system is disabled but normal brake function remains operational.
  • Page 89 This light comes on briefly when you turn the ignition key to ON, but it normally goes off shortly after the engine starts and you release the parking brake. If the light stays on or comes on after you have released the parking brake fully, have the hydraulic brake system serviced.

  • Page 90: Instrument Panel Controls

    Instrument Panel Controls Grand Marquis instrument panel...
  • Page 91 The main controls for the climate control system, clock, and radio are on the instrument panel. NOTE: Any cleaner or polish that increases the gloss (shine) of the upper part of the instrument panel should be avoided. The dull finish in this area is to help protect the driver from undesirable windshield reflection.
  • Page 92 The controls for the manual heating and air conditioning system For maximum heating, move the SELECT knob to FLOOR, move the TEMP knob to the end of the red range (full clockwise) and move the fan speed to HI. To heat the interior of your vehicle and defrost the windshield at the same time, move the SELECT knob to MIX and select the temperature and fan speed desired.
  • Page 93 Fan speed can be reduced, after a comfortable temperature has been reached, to provide quieter system operation. To cool your vehicle using outside air, move the SELECT knob to NORM A/C, move the TEMP knob to the end of the blue range (full counterclockwise) and set the fan to the desired speed.
  • Page 94 The controls for the electronic automatic temperature control To turn your EATC on, push the AUTOMATIC button or any of the six override buttons along the bottom of the control. To turn your EATC off, press the OFF button. When the system is off, the display window will be blank (dark) except when OUTSIDE TEMP has been selected.
  • Page 95 To change the temperature in the display window, select any temperature between 65˚F (18˚C) and 85˚F (29˚C) using the BLUE (cooler) or RED (warmer) buttons. The Electronic Automatic Temperature Control will do the rest. If you want continuous maximum cooling, push the BLUE button until 60˚F (16˚C) is shown in the display window.
  • Page 96 Automatic operation Push the AUTOMATIC button and select the desired temperature. The selected temperature and AUTO will be shown in the display window. The EATC will automatically heat or cool to achieve the set temperature. Under normal conditions, your EATC will need no additional attention.
  • Page 97 Temperature selection The RED and BLUE buttons at the upper left of the Control are for temperature selection. The RED button will increase the set temperature and the BLUE button will lower the set temperature. Pressing a button and releasing it will change the set temperature one degree.
  • Page 98 Temperature display The selected temperature displayed in the window can be set for either 0˚F or 0˚C. Your car may have an English/Metric (E/M) Button to change your speedometer from miles to kilometers. When pressed, this button also changes the temperature display. With or without an E/M Button, the temperature display can also be changed to 0˚F or 0˚C using the MAX A/C and DEFrost override buttons.
  • Page 99 Fan speed and thumbwheel Your EATC automatically adjusts the fan speed to the existing conditions. You must push AUTOMATIC for automatic fan speed operation. To control the fan speed yourself, use the thumbwheel which will cancel the automatic fan speed control. The thumbwheel is located at the extreme right side of the EATC control panel.
  • Page 100 You can override the fan speed at any time. If you use the thumbwheel to override the fan speed, the EATC will continue to control the temperature but you control the fan speed. To return to auto fan control, press the AUTOMATIC button.
  • Page 101 NORM A/C button When you push this button, you select air conditioning using outside air. The Display window will indicate A/C under the selected temperature. The cooled air will flow from the instrument panel registers. The fan speed will continue on automatic. VENT button Push this button to select outside air through the instrument panel registers.
  • Page 102 DEF V button Press the DEF V button to obtain maximum airflow to the windshield. Adjust the temperature setting as required for defrosting. The Display window will show the temperature setting with the defrost symbol V to the left of the temperature.
  • Page 103 If the EATC is turned OFF while the outside temperature is displayed, the temperature will continue to be displayed. Press the OUTSIDE TEMP button to clear the display window. When the ignition key is turned OFF the display will be blank (dark). NOTE: The outside temperature reading is most accurate when the vehicle is moving.

  • Page 104: Rear Window Defroster

    Service If your EATC is not operating as described here, take it to your dealer to have it checked. System diagnostics are built in which will allow your dealer to readily identify problems that might occur. Rear Window Defroster The defroster for the rear window clears frost, fog, or thin ice from both the inside and outside of the rear window.

  • Page 105: The Interior And Exterior Lights

    The heating elements are bonded to the inside of the rear window. Do not use sharp objects to scrape the inside of the rear window or use abrasive cleaners to clean it. Doing so could damage the heating elements. The Interior and Exterior Lights Daytime Running Light System (Canadian vehicles only) The Daytime Running Light (DRL) system turns...
  • Page 106 Turning On the Exterior Lights To turn on the headlamps, parking lamps, side markers, and tail lamps, use the rotary knob that is to the left of the steering wheel. The knob that controls the headlamps and parking lamps When you turn on the headlamps, the parking lamps, tail lamps, and side markers automatically turn on.
  • Page 107 Setting the Autolamp On/Off Delay System The autolamp sets the headlamps to turn on and off automatically. You can use the autolamp to: turn on the lamps automatically at night turn off the lamps automatically during daylight keep the lamps on for up to three minutes after you turn the key to OFF.
  • Page 108 Do not put any articles on top of the photocell that is located in the top left corner of the instrument panel. This photocell controls the autolamp. If you cover it, the photocell reacts as if it is nighttime, and the lamps turn on. You can adjust the autolamp to keep the lamps on after you leave your vehicle.
  • Page 109 Lighting Up the Interior and Instrument Panel With the parking lamps or headlamps illuminated, you can brighten or dim the lights in the instrument panel. To do this, locate the switch above the headlight control knob and press it up (to brighten the lights) or down (to dim the lights).
  • Page 110 Using the Automatic Illuminated Entry System (If equipped) The interior lights will illuminate for approximately 25 seconds when either front door handle is lifted, any button on the keyless entry pad is pressed, or the remote entry system UNLOCK button is pushed. If the amount of light outside your vehicle is below a predetermined level, the exterior lights will also illuminate.
  • Page 111 Turning on the Map and Reading Lamps Your vehicle has two map lamps for the passenger and the driver. To turn on the map lamps, push the switch next to each lamp. Front seat map and dome lamps The dual beam map lamps are located on each side of the dome lamp.
  • Page 112 Rear Courtesy/Reading Lamps (If equipped) Your vehicle may be equipped with a courtesy/reading lamp located at the rear-center of the headliner (roof). The right lamp is for the right side passenger and the left lamp is for the left side passenger. Rear seat courtesy/reading lamps (optional) With the lens in the flat position, the courtesy/reading lamp will illuminate when any...
  • Page 113 Clock The digital clock 1. To set the hour, press and hold the H button. When the desired hour appears, release the button. 2. To set the minutes, press and hold the M button. When the desired minute appears, release the button. Cleaning the Instrument Panel Lens Clean the instrument panel lens with a soft cloth and a glass cleaner, such as Ford Ultra-Clear...

  • Page 114: Steering Column Controls

    Steering Column Controls The controls on the steering column and wheel are designed to give you easy access to the controls while you are driving. The Turn Signal Lever You can use the turn signal lever on the left side of the steering column to: operate the turn signals turn the high beams on/off...
  • Page 115 Turn Signals Move the lever up to signal a right turn. Move it down to signal a left turn. The corresponding indicator light in the instrument cluster will flash. If the turn signal stays on after you turn, move the lever back to the center (off) position. For lane changes, move the lever far enough to signal but not to latch.

  • Page 116: Windshield Wipers And Washer

    Windshield Wipers and Washer To turn on the windshield wipers, the ignition key must be turned to the ON or ACC position. Rotate the end of the lever away from you to activate the wipers. The first seven detents are interval wipe positions, the eighth detent is the LO position and the ninth detent is the HI position.
  • Page 117 See the Servicing Your Grand Marquis chapter. If there is enough fluid, consult your nearest Ford or Lincoln-Mercury dealer. Do not try to clean the windshield when the washer fluid container is empty or activate the washers at any time for more than 15 seconds continuously.
  • Page 118 Hazard Flasher To alert other drivers to hazardous situations, push in the hazard flasher on the top of the steering column. The same switch turns the flashers off. The flashers work whether your vehicle is running or not. The flashers work for up to two hours when the battery is fully charged and in good condition without draining the battery excessively.
  • Page 119 Horn To sound the horn, push the center pad area of the steering wheel. The horn on the steering wheel...

  • Page 120: Tilt Steering

    Tilt Steering RWARNING Never adjust the steering wheel when the vehicle is moving. The lever to tilt the steering wheel To change the position of the steering wheel, pull the release lever on the column toward you. Tip the steering wheel to the desired position. Release the lever to lock the steering wheel in place.
  • Page 121 Speed Control (If equipped) If your vehicle has speed control, you can automatically maintain a constant speed at or above 30 mph (50 km/h). Use of radio transmitting equipment that is not Federal Communications Commission (FCC) or in Canada the Canadian Radio and Telecommunications Commission (CRTC) approved may cause the speed control to malfunction.
  • Page 122 The speed control switches on the steering wheel To set the speed control: 1. Press and release the ON switch. 2. Accelerate to the desired speed above 30 mph (50 km/h) using the accelerator pedal. 3. Press the SET ACCEL switch and release it immediately to set your speed.
  • Page 123 NOTE: If your speed increases above your set speed while driving in D (Drive) on a downhill grade, you may want to depress the Transmission Control Switch located on the shift lever to turn off overdrive to reduce vehicle speed. Speed control cannot reduce the vehicle speed if it goes above your set speed on a downhill grade.
  • Page 124 TAP-DOWN — Press and then quickly release the COAST switch. Each time you “tap” the switch, the set speed will decrease by one (1) mph (1.6 km/h). Multiple taps will cause the set speed to decrease in increments of one (1) mph (1.6 km/h). For example, if the current set speed is 60 mph (96 km/h) five (5) taps of the COAST switch will decrease the vehicle speed and SET it at...
  • Page 125 Cancelling and Resuming a Set Speed If you press the brake pedal, speed control is suspended. You can return to the set speed by pressing the RESUME switch, as long as you did not press the OFF switch. You must be driving at least 30 mph (48 km/h).

  • Page 126: Features

    Features Your vehicle has a variety of features designed for your comfort, convenience and safety. Read this chapter to find out about standard and optional features. Doors Childproof Locks for the Rear Doors In addition to power locks, your vehicle has childproof locks for the rear doors.
  • Page 127 To set the childproof lock on each rear door, open the rear door. Find the lever inside the label with the word LOCKED. Move the lever up. To release the childproof lock, open the rear door from the outside. Move the lever down. Power Door Locks (If equipped) If your vehicle has power door locks, the controls to lock the doors are on the trim panel...
  • Page 128 Using the Illuminated Entry System (If equipped) The interior lights will illuminate for approximately 25 seconds when either front door handle is lifted, any button on the keyless entry pad is pressed, or the remote entry system UNLOCK button is pushed. If the amount of light outside your vehicle is below a predetermined level, the exterior lights will also illuminate.
  • Page 129 When you bought your vehicle, you were given a computer code that operates the system for your vehicle. For your convenience, we have duplicated this code in three places. The code is: on your owner’s wallet card found in the glove compartment taped to the underside of the trunk lid taped to the computer module behind the...
  • Page 130 3. To unlock the trunk, press the 5/6 button within five seconds of unlocking the driver’s or passenger’s doors, or re-enter the code to open the driver’s door, then press 5/6. As long as the driver’s door has been unlocked first, you can open the passenger’s doors or the trunk in any order.
  • Page 131 If you do not want to use the Autolock feature, it can be deactivated by using the buttons for the keyless entry system. To deactivate the Autolock feature: 1. Enter your permanent five-digit entry code (not the user code you may have set). 2.
  • Page 132 5. Five seconds after you press the fifth digit, your door lock system will lock and unlock the vehicle doors to confirm successful programming. The keyless entry system registers this second code. To open your vehicle, you can now use either code. The module remembers only one personal code at a time.

  • Page 133: Remote Entry System

    Battery Saver When the ignition is turned off, the vehicle will turn off battery voltage to the vehicle lamps as follows: Courtesy lights (lights which come on when a door is opened): after 10 minutes. Map/Glove compartment/Trunk/Hood lamps: after 30 minutes. Headlamps/Park lamps (only if headlamp switch is left in Headlamp position): after 10 minutes.
  • Page 134 Remote entry transmitter Unlocking the doors and opening the trunk To unlock the driver’s door, press the UNLOCK button. To unlock the other doors, press the UNLOCK button a second time within five seconds of unlocking the driver’s door. To open the trunk, press the TRUNK button twice within five seconds.
  • Page 135 Replacement batteries can be purchased at most pharmacies, watch stores or at your Ford or Lincoln-Mercury dealer. NOTE: The operating range of the remote entry system can also be affected by...
  • Page 136 Replacement/additional transmitters In the event a transmitter is lost, a new one may be purchased from your dealer. To program replacement or additional transmitters you must have all the transmitters intended for use on your vehicle. Initiating the following procedure erases all prior programmed transmitters, thus ALL must be reprogrammed at the same time.
  • Page 137 NOTE: All transmitters to be used on your vehicle must be programmed/reprogrammed at the same time. Windows Using the Power Windows Each door has a power control that opens and closes the window on that door. The driver’s door has a master control panel that operates all four windows.
  • Page 138 There is also an Express Down feature on the driver’s power window. To operate, actuate driver’s power window switch to the down position for less than 0.4 seconds; the window will then open automatically. To terminate automatic operation before the window completely opens, operate the switch again, for less than 0.4 seconds, to either the up or down position.
  • Page 139 Adjusting the Front Passenger Seat Manually In the front seats, you can move the whole seat forward or backward or tilt the back of the seat forward or backward. To move the seat forward or backward: 1. Find the adjustment bar underneath the front part of the seat.
  • Page 140 To recline the front seat: 1. On the side of the seat, find the handle for the recliner. 2. Lift the handle up and hold it in place. 3. Lean against the back of the seat and adjust it to the position you want. You can tilt the seat back or bring it forward.
  • Page 141 Using the Power Seats (If equipped) If your vehicle has power seats, you can adjust them in several directions. The controls are located on the driver and passenger door trim panels or on the side of the driver’s seat. The power seat controls on the driver’s seat — Base models RWARNING Do not pile cargo higher than the seatbacks to avoid injuring people in a...
  • Page 142 The power lumbar switch Cleaning the Seats Leather and vinyl For routine cleaning, wipe the surface with a soft, damp cloth. For more thorough cleaning, wipe the surface with a leather and vinyl cleaner or a mild soap. Fabric Remove dust and loose dirt with a whisk broom or a vacuum cleaner.
  • Page 143 Mirrors You can adjust your rearview mirror in any direction. The special swivel bracket lets you move the mirror up or down and from side to side. RWARNING Make sure you can see clearly through the rearview mirror at all times. Do not block your vision.
  • Page 144 To turn the mirror on, push the ON/OFF switch, located on the bottom of the mirror, to latch it in the ON position. The switch will illuminate and the mirror will be in the automatic dimming mode. To turn the switch illumination and automatic dimming feature off, push the ON/OFF switch again.
  • Page 145 The mirror controls on the driver’s left armrest To adjust the side mirrors: 1. Find the control switch in the driver’s door panel. 2. Select the right or left mirror by moving the selector switch to R or L. 3. Move the knob in the direction of the arrows for the direction you want to move the mirror.

  • Page 146: Sun Visors

    RWARNING The side view mirror on the right makes objects appear smaller and farther away than they actually are. Sun Visors Using the Sun Visors Your vehicle has special sun visors. Besides the regular sun visor, you may have a second sun visor.
  • Page 147 Turning on the Mirror Light on the Sun Visors (If equipped) To turn on the visor mirror light, lift the mirror cover. The mirror on the sun visor Ashtray and Cupholder Your vehicle is equipped with an ashtray/cupholder mounted to the lower center of the instrument panel.
  • Page 148 Power Point Electrical Outlet The power point outlet is located on the instrument panel to the right of the ashtray. This outlet should be used for optional electrical accessories. NOTE: Do not attempt to plug the cigarette lighter into the power point outlet. Damage could occur.

  • Page 149: Storage Compartments

    Storage Compartments Your vehicle may have several small storage compartments: a glove compartment that locks. Use the round key to lock and unlock it. two map pockets on the panels of the front doors. two map pockets on the back of the front seats.
  • Page 150 Using the Remote Control for the Trunk (If equipped) You can use the remote control on the driver’s door to unlock and open the trunk unless you lock the button with the main key. The valet key equipped with your vehicle can only open the doors and start the engine.
  • Page 151 Positive Location Floor Mat When installing or removing the driver’s side floor mat you must attach/detach the positive location grommet from the hook on the floor. The hook is just forward of the center of the driver’s seat. This is done by rotating the grommet one quarter turn, slipping the eyelet onto the hook, and sliding it to the floor.

  • Page 152: Electronic Sound Systems

    Electronic Sound Systems Luxury Audio System (Analog)
  • Page 153 Luxury Audio System Using the Controls on Your New Radio How to turn the radio on and off Press the “VOL/PUSH ON” knob to turn the radio on. Press again to turn it off. How to adjust the volume Turn the “VOL/PUSH ON” knob to the right to increase the volume and to the left to decrease the volume.
  • Page 154 Using the “SEEK” function Press the right a side of the “SEEK” button to select the next listenable station up the frequency band. Press the left b side of the button to select the next listenable station down the frequency band. By holding the button down, listenable stations can be passed over to reach the desired station.
  • Page 155 Using the Automatic Memory Store feature (“AUTOSET”) If the memory buttons have been set, either by using the Auto Memory Load feature or if you have set them manually, the system is prepared to let you use a convenient feature called Automatic Memory Store.
  • Page 156 Adjusting the tone balance of your radio Increasing or decreasing bass and treble response Push the “BASS/TREB” popout knob to gain access to the bass and treble controls. Bass control allows you to adjust the lower, bass frequencies to your preference. The outer ring of the “BASS/TREB”...
  • Page 157 Your Antenna Antennas for both AM and FM reception are hidden in the back glass of your vehicle. There is an internal antenna module that will switch between AM and FM, when bands are changed, for maximum reception performance. NOTE: Do not attempt to adapt any other type of antenna system to your audio system.
  • Page 158 How to locate a desired track on the tape There are six ways to quickly locate a desired selection on the tape. You can use the fast forward, rewind, Blank Skip, “SEEK”, “SCAN” or “SIDE 1-2” functions. Following are brief descriptions of each: Fast forwarding the tape To fast forward the tape, press the “FF”...
  • Page 159 Using the “SCAN” function with your cassette tape player Pushing the “SCAN” button will begin the forward scan mode on the tape currently playing, stopping on each tape selection for approximately eight seconds. To stop the scan mode on the presently sampled tape selection, press the “SCAN”...
  • Page 160 Tape error messages Your cassette tape player is equipped to diagnose certain problems you may experience. Error codes are as follows: TD E1 — Radio tries to change sides of tape 3 times in a 10 second span. Push “EJECT” and try another tape.
  • Page 161 Protect cassettes from exposure to direct sunlight, high humidity and extreme heat or cold. If they are exposed to extreme conditions, allow them to reach a moderate temperature before playing. If a tape is loose inside the cassette, tighten it before playing by putting your finger or a pencil into one of the holes and turning the hub until the tape is tight.
  • Page 162 Midline Stereo Cassette...
  • Page 163 Midline Stereo Cassette Radio Using the Controls on Your New Radio How to turn the radio on and off Press the “VOL/PUSH ON” knob to turn the radio on. Press again to turn it off. How to adjust the volume Turn the “VOL/PUSH ON”...
  • Page 164 How to tune radio stations There are four ways for you to tune in a particular station. You can manually locate the station using the “SCAN/TUNE” button, “SEEK” the station, “SCAN” to the station or select the station by using the memory buttons, which you can set to any desired frequency.
  • Page 165 Setting the Station Memory Preset buttons Your radio is equipped with 6 station memory buttons. These buttons can be used to select up to 6 preset AM stations and 12 FM stations (6 in FM1 and 6 in FM2). Follow the easy steps below to set these buttons to the desired frequencies: 1.
  • Page 166 Adjusting speaker fader Fade control allows you to adjust the sound distribution between the front and rear speakers. Press the top ( c ) of the “FADE” button to shift the sound to the front speakers, and press the bottom ( d ) of the “FADE”...
  • Page 167 How to locate a desired track on the tape There are four ways to quickly locate a desired selection on the tape. You can use the fast forward, rewind, “SEEK”, or “SCAN” function. Following are brief descriptions of each. Fast forwarding the tape To fast forward the tape, press the “FF”...
  • Page 168 To stop the scan mode on the presently sampled tape selection, press “SCAN” a second time. How to change the side of the tape being played The alternate side of the tape can be selected by pressing the “SIDE 1-2” button. How to eject the tape To stop the tape and eject the cassette, press the “EJ”...
  • Page 169 Tips on Caring for the Cassette Player and Tapes In order to keep your cassette tape player performing the way it was meant to, read and follow these simple precautions: Using a Ford Cassette Cleaning Cartridge to clean the tape player head after 10-12 hours of play will help maintain the best playback sound and proper tape operation.
  • Page 170 Common Radio Reception Conditions Several conditions prevent FM reception from being completely clear and noise-free, such as the following: 1. Distance/Strength The strength of the FM signal is directly related to the distance the signal must travel. The listenable range of an average FM signal is approximately 25 miles (40 kilometers).
  • Page 171 When the radio waves are reflected off objects or structures, the reflected signal cancels the normal signal, causing the antenna to pick up noise and distortion. Cancellation effects are most prominent in metropolitan areas, but also can become quite severe in hilly terrain and depressed roadways.
  • Page 172 All About Radio Frequencies The Federal Communications Commission (FCC) and the Canadian Radio Telecommunications Commission (CRTC) establishes the frequencies that AM and FM radio stations may use for their broadcasts. The allowable frequencies are, AM: 530, 540...1600, 1610 kHz in 10 kHz steps; FM: 87.9, 88.1...107.7, 107.9 MHz in 0.2 MHz steps.
  • Page 173 Important Warranty and Service Information Warranty Your sound system is warranted for three years or 36,000 miles (60,000 kilometers), whichever comes first. Consult your vehicle warranty booklet for further information. Ask your dealer for a copy of this limited warranty. Service At Ford Electronics, we stand behind our audio systems with a comprehensive service and repair...

  • Page 174: Driving Your Grand Marquis

    Driving Your Grand Marquis Driving with an Automatic Overdrive Transmission The automatic overdrive transmission operates very much like a regular automatic transmission, except it offers the extra overdrive feature. Putting Your Vehicle in Gear RWARNING Hold the brake pedal down while you move the gearshift lever from position to position.
  • Page 175 Your vehicle is equipped with a Brake Shift Interlock safety feature. This feature prevents the gearshift from being moved from the P (Park) position until the brake pedal is depressed. This feature is active when the ignition is in the ON position.
  • Page 176 The positions of the gearshift Once the gearshift is secure in the desired position, release the brake pedal and use the accelerator as necessary. R (Reverse) With the gearshift in the R (Reverse) position, the vehicle will move backward. You should always come to a complete stop before shifting into or out of R (Reverse).
  • Page 177 Driving Your vehicle’s gearshift is on the steering column. The Transmission Control Switch (TCS) is located on the end of the gearshift lever. The Transmission Control Indicator Light (O/D OFF) is located on the instrument panel. You can put the gearshift lever in any of the several positions.
  • Page 178 When to use j (Overdrive) Overdrive is the usual driving position for an automatic overdrive transmission. It works the same way Drive works, automatically upshifting or downshifting as the vehicle speeds or slows. However, Overdrive also shifts into a fourth gear —an overdrive gear —...
  • Page 179 P (Park) Always come to a complete stop before you shift into P (Park). Make sure that the gearshift is securely latched in P (Park). This locks the transmission and prevents the rear wheels from rotating. RWARNING Always set the parking brake fully and make sure that the gearshift is securely latched in P (Park).
  • Page 180 RWARNING To avoid injury, never run the engine with one wheel off the ground, such as when changing a tire. Traction Assist Your vehicle may be equipped with the optional Traction Assist system. This system helps prevent wheel spin in order to improve tire traction and is an especially useful feature when you drive in hilly areas or on slippery, icy or snowy roads.

  • Page 181: Steering Your Vehicle

    If the Traction Assist excessively, the system will shut down to prevent the rear brakes from overheating. During this shutdown period, the word OFF in the traction assist switch will be illuminated showing that the traction assist system is inoperative. A cooling down period is required to prevent damage to the rear brakes.
  • Page 182 Speed Sensitive Power Steering (If equipped) The steering system in your vehicle is speed sensitive. This means that the steering effort is light for parking and heavier for highway driving. However, if you have to swerve around an object or another vehicle, your steering will have full power assist.
  • Page 183 Do not drive with your foot resting on the brake pedal; you will wear out the linings and increase your vehicle’s stopping distance. Brake rotor damage may also eventually occur. NOTE: If you are driving down a long or steep hill, shift to a lower gear and do not apply your brakes continuously.
  • Page 184 To manually set the parking brake after parking your vehicle, apply the brake pedal with your right foot and hold it while you push the parking brake down firmly and fully with your left foot. The brake system warning light will glow.
  • Page 185 RWARNING To prevent personal injury, do not release the parking brake while outside the vehicle. Always check the Brake Warning Light each time you start your engine. Driving with the parking brake on will cause the brakes to wear out quickly and will reduce the fuel economy. RWARNING If the parking brake is fully released, but the Brake System light remains on, have...
  • Page 186 whenever jacking up or towing the vehicle. If you have the mechanical cluster, “AIR SUSP” will appear in the cluster, if you have an electronic cluster, “CHECK AIR SUSPENSION” will appear in the message center when the ignition switch is in the ON position, and either the shutoff switch is in the OFF position, or a system fault has been detected.
  • Page 187 Driving Under Special Conditions Tips for Safe Driving As with any new vehicle, yours may drive and handle differently from your previous vehicle. Use care until you become accustomed to its various features and driving characteristics. Operate your vehicle within reasonable limits. Sudden acceleration, deceleration, turning, or combinations of these maneuvers can cause a vehicle to behave differently than anticipated.
  • Page 188 RWARNING If your vehicle has speed control, do not use it on slippery roads. You could lose control of your vehicle and could injure someone. If your vehicle gets stuck (for example, in mud or snow), you may try to “rock” it out of the spot.
  • Page 189 Driving With a Heavy Load There are limits to the amount of weight your vehicle can carry or tow. The total weight of your vehicle, plus the weight of the passengers and cargo, should never be more than the Gross Vehicle Weight Rating (GVWR).
  • Page 190 To figure the weight of your vehicle’s load, add the weights of: the driver and passengers luggage and any other items that you put in your vehicle the tongue load of the loaded trailer the weight of any equipment that has been added to your vehicle since it was delivered to your dealer If you do not know the actual weights of these...
  • Page 191 Your vehicle does not come from the factory fully equipped to tow. No towing packages are available through Ford or Lincoln/Mercury dealers. Because towing a trailer puts extra strain on your vehicle, you must follow certain...
  • Page 192 Ten to 15% of the loaded trailer’s weight should be on the tongue. However, the tongue load should never exceed 10% of the maximum weight that your vehicle can safely tow. RWARNING Do not tow a trailer when the temporary spare tire is being used.
  • Page 193 If you are not certain that you are using the right equipment in the proper manner, see your Ford or Lincoln-Mercury dealer. Do not use hitches that clamp onto your vehicle’s bumper. The bumper is not designed to bear the load.
  • Page 194 Hook-Up and Adjustment Procedure — Load Equalizing Hitch Your vehicle is equipped with a rear air suspension system. When hooking up a trailer using a load equalizing hitch, always use the following procedure: 1. Place the unloaded vehicle on a level surface.
  • Page 195 Connecting the safety chains Always attach the trailer’s safety chains to your vehicle. They help protect your trailer if the hitch breaks. To connect the trailer’s safety chains: 1. Cross the chains under the trailer tongue and attach them to your vehicle’s frame or hook retainers.
  • Page 196 RWARNING Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system. Your vehicle may not have enough braking power and your chances of having a collision greatly increase. Connecting the trailer’s lights Do not connect a trailer’s lighting system wiring directly to your vehicle’s lighting system wiring.
  • Page 197 Driving While You Tow Be especially careful when driving while you tow a trailer. Never drive faster than 45 mph (70 km/h) when you tow in hilly country on hot days. Also, anticipate stops so that you can brake gradually. When you tow down steep grades, move the gearshift to 1 (Low).

  • Page 198: Roadside Emergencies

    Roadside Emergencies Jump-Starting Your Vehicle Your vehicle’s battery may die if you leave the lights on or any electrical equipment on after you turn the engine off. If this happens, you may be able to jump-start from a booster battery to start your vehicle.
  • Page 199 first, then Milk of Magnesia, a beaten egg, or vegetable oil. Call a doctor immediately. To avoid damaging your vehicle or your battery, and to avoid injury to yourself, follow these directions for preparing your vehicle to jump-start and connecting the jumper cables in the order they are given.
  • Page 200 Connecting the jumper cables 1. Connect one end of the first jumper cable to the positive (+) terminal of the discharged battery. (You can connect either jumper cable to the positive (+) terminal, as long as you use the same cable for both positive terminals.) Most jumper cables have a red cable and a black cable.
  • Page 201 The 4.6L SFI engine...
  • Page 202 Jump-Starting 1. Make sure that the jumper cables are not in the way of moving engine parts, then start the booster vehicle. Run the engine at a moderate speed. 2. Let the discharged battery charge for a few minutes and then start the disabled vehicle. It may take a couple of tries before the vehicle starts.

  • Page 203: Changing A Tire

    Changing a Tire If you get a flat tire while you are driving, do not apply the brake heavily. Instead, gradually decrease the speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road. Park on a level spot, turn off the ignition, set the parking brake, and turn on the hazard flashers.
  • Page 204 When you drive with the temporary spare tire, DO NOT: exceed 50 mph (80 km/h) under any circumstances. load your vehicle so that it is heavier than the maximum vehicle load rating listed on the tire decal. tow a trailer. use tire chains on this tire.
  • Page 205 Spare Tire Location The spare is stored in the trunk. The spare tire location To remove the spare tire: 1. Lift off the spare tire cover (if equipped). 2. Unscrew the wing-nut holding down the spare tire. 3. Lift out the spare tire.
  • Page 206 Preparing to Change the Tire 1. Make sure that your vehicle will not move or roll. Put the gearshift in P (Park). Set the parking brake and block the wheel that is diagonally opposite the tire that you are changing. When one of the back wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack,...
  • Page 207 To avoid injury, never run the engine with one wheel off the ground, such as when changing a tire. 2. Get out the spare tire and jack. On vehicles equipped with Air Suspension, turn OFF the Air Suspension switch prior to jacking, hoisting or towing your vehicle.
  • Page 208 Removing and Replacing the Tire 1. Find the jacking location notches (a depression on plastic moulding) near the tire that you are changing. Align the two tabs on jack with rectangular notch on sheet metal. Slowly push jack straight until the tabs are against the side of the frame.

  • Page 209: Lug Nuts

    NOTE: Never use the differential housing as a lift point. Jacking locations Locating the notch for the jack — rear wheels Locating the notch for the jack — front wheels 2. Turn the jack handle clockwise until the wheel clears the ground. Remove the wheel lug nuts.
  • Page 210 3. If you are replacing the front tire (with aluminum wheels) with the temporary spare tire, you need to remove the black dust shield. Gently pull the shield over the rubber o-rings and slide it off the wheel studs. Because the rubber o-rings are soft, they should pass through the holes in the shield.
  • Page 211 8. Place any wheel covers and ornaments in the trunk. 9. Put the tire, jack, and wrench away. Make sure the jack is securely fastened so it does not rattle when you drive. 10. Unblock the wheels. 11. Turn the air suspension ON (if so equipped). Installation of the black dust shield When installing the regular tire, reinstall the black dust shield by orienting and sliding the...
  • Page 212 Install the center ornament on the wheel and be sure it is snapped into place all the way around using the palm of the hand or a rubber mallet. Steel wheel with full wheelcover Steel wheel with full wheelcover Remove the wheelcover from the wheel using the flanged end of the wheel nut wrench by inserting the handle and then prying against the inner wheelcover flange.
  • Page 213 NOTE: DO NOT USE A STEEL HAMMER. If you have the anti-theft locking spoked wheel cover, each wheel cover has a lock bolt behind the center hub ornament. You need a special key wrench (stored in the glove box) to pry this ornament off and to remove the lock bolt.

  • Page 214: Towing Your Vehicle

    Towing Your Vehicle If you need to have your vehicle towed, contact a professional towing service or, if you are a member, your roadside assistance center. Recommended towing options include wheel lift towing or flat bed towing. Before your vehicle can be towed, the air suspension switch in the luggage compartment needs to be turned to the OFF position.
  • Page 215 When calling for a tow truck, tell the operator what kind of vehicle you have. A towing manual is available from Ford Motor Company for all authorized tow truck operators. Have your tow truck driver refer to this manual for the proper hook-up and towing procedures for your vehicle.

  • Page 216: Customer Assistance

    To purchase Roadside Assistance coverages beyond this period, through Ford Auto Club, contact your Ford or Lincoln-Mercury dealer (not available in Canada). Roadside Assistance will cover the following: Mount your spare if you have a flat tire.
  • Page 217 1-800-241-FORD (in Canada call 1-800-665-2006). If You Have a Service Problem Ford Motor Company has authorized Ford and Lincoln-Mercury dealerships that can service your vehicle for you. This chapter tells you how to get service or maintenance for your vehicle.
  • Page 218 You may, however, take your vehicle to any authorized Ford or Lincoln-Mercury dealer. In most cases, your dealer will be able to resolve your concern. If you are not satisfied with the service you received from your dealership’s service...
  • Page 219 In the U.S., contact: If you live in Canada and have any questions or concerns that the dealership cannot answer, contact the Customer Assistance Centre. Please have the following information available when contacting Ford Customer Assistance: your telephone number (both business and home) the name of the dealer and the city where the dealership is located...

  • Page 220: The Dispute Settlement Board

    Review? The Board reviews all product performance and service complaints on Ford, Mercury and Lincoln Cars and Ford and Mercury Light Trucks under warranty that have not been resolved by a dealer or Ford Motor Company. The Board does not review issues involving:...
  • Page 221 How Does the Board Work? The Board has four members: three consumer representatives a Ford or Lincoln-Mercury dealer Consumer candidates for Board membership are recruited and trained by an independent consulting firm. Dealers are chosen because of their business leadership qualities.
  • Page 222 presentations may be requested by the Board. A decision is made by the Board by simple majority vote. Board members review all the materials related to each complaint and, based on the available information, arrive at a fair and impartial decision.
  • Page 223 What is the Review Process? Your application will be reviewed and if it is determined to be eligible, you will receive an acknowledgment indicating the file number assigned to your application and the local Board address. At the same time, your dealer and Ford Motor Company representative are asked to submit statements.

  • Page 224: Reporting Safety Defects

    the names (if known) of all people you contacted at the dealership a description of the action you want done to resolve your concern. Should your application NOT qualify for review, an explanation will be mailed to you. Reporting Safety Defects (U.S.
  • Page 225 Ford of Canada Customer Assistance Ford Motor Company of Canada, Limited If you live in Canada and have any questions or concerns that the dealership cannot answer, contact the Customer Assistance Centre. Canadian Motor Vehicle Arbitration Plan (CAMVAP) If a specific item of concern arises, where a solution cannot be reached between a vehicle owner, Ford of Canada, and/or one of its dealers (that all parties can agree upon), the...
  • Page 226 Consumers wishing to obtain further information about the program can obtain an information booklet from your dealer or contact the Provincial Administrator, Canadian Motor Vehicle Arbitration Plan, at the address or telephone number shown below. O & P Services 595 Bay Street — Suite 300 Toronto, Ontario M5G 2C2 Telephone 1 (800) 207-0685...
  • Page 227 You may also have difficulty importing your vehicle back into the U.S. if you use leaded fuel. If your vehicle must be serviced while you are traveling or living in Central or South America, the Caribbean, or the Middle East, contact the nearest Ford dealership.

  • Page 228: Accessories

    Accessories Ford Accessories for Your Vehicle Ford has many fine products available from your dealer to clean your vehicle and protect its finishes. For best results, use the following, or products of equivalent quality: A wide selection of accessories is available through your local authorized dealer.
  • Page 229 Safety, Comfort, and Convenience NOTE: When adding accessories, equipment, passengers, and luggage to your vehicle, do not exceed the total weight capacity of the vehicle or of the front or rear axle (GVWR, GAWR as shown on the Safety Compliance Certification Label).
  • Page 230 NOTE: The Federal Communications Commission (FCC) or in Canada the Canadian Radio Telecommunications Commission (CRTC) regulates the use of mobile communications systems — such as two-way radios, telephones, and theft alarms — that are equipped with radio transmitters. Any such equipment installed in your vehicle should comply with FCC regulation and should be installed only by a...
  • Page 235 Servicing Your Grand Marquis Service Made Easy Ford has two goals for servicing your vehicle. 1. When we can, we design parts that do not need to be serviced. 2. We want to make servicing your vehicle as easy as possible. To help you: We highlight do-it-yourself items in yellow in the engine compartment so that you can find them easily.

  • Page 236: Servicing Your Grand Marquis

    Ford Motor Company recommends that the Owner Maintenance Checks listed in the Maintenance Schedule and Record booklet be performed for the proper operation of your vehicle. In addition to the conditions listed in the Owner Maintenance Checklist, be alert for any unusual noise, vibration, or other indication that your vehicle may need service.
  • Page 237 Never get under a vehicle while it is supported by a jack only. If you must work under a vehicle, use safety stands. Keep all lit cigarettes and other smoking materials away from the battery and all fuel-related parts. Working with the engine off: 1.

  • Page 238: Opening The Hood

    Opening the Hood 1. Inside the vehicle, pull the hood release located under the lower left corner of the instrument panel. The hood release under the instrument panel 2. Go around to the front of the vehicle, and release the auxiliary catch that is located under the front edge of the hood at the center of the vehicle.

  • Page 239: Engine Compartment

    Whenever you close the hood, latch it securely. NOTE: Apply lubricant to the hood latch at six-month intervals to maintain smooth and trouble-free operation. Engine Compartment Your vehicle has a 4.6 liter engine. The following page shows a diagram of where to find items that you should regularly service.
  • Page 240 A 4.6 liter SFI engine...

  • Page 241: Filling The Fuel Tank

    Cleaning the Engine A clean engine is more efficient because a buildup of grease and dirt acts as an insulator, keeping the engine warmer than usual. Extreme care must be used if a power washer is used to clean the engine. The high pressure fluid could penetrate sealed parts and assemblies causing damage or malfunctions.
  • Page 242 2. Put the nozzle all the way inside the fuel filler pipe before pumping the fuel. NOTE: If you spill any fuel on the body of your vehicle, clean it off immediately. The fuel may dull or soften the paint if you do not wash it off.
  • Page 243 Octane recommendations Your engine is designed to use fuel with an octane rating of 87. In most cases it is not necessary to use a fuel with an octane rating higher than 87. At service stations, the octane rating is displayed in a label on the pumps. Using a fuel with a lower octane rating can cause persistent and heavy knocking, which can damage the engine.
  • Page 244 Reformulated gasoline is also required in certain areas of the U.S. These fuels are designed to further reduce emissions from your vehicle. Generally, you should not experience difficulties operating your vehicle on fuels containing oxygenates. We encourage you to use these fuels.

  • Page 245: Calculating Fuel Economy

    Gasoline and gasoline blends may contain small amounts of carcinogens, such as benzene. Long-term exposure to unleaded gasoline vapors has caused cancer in laboratory animals. If you are taking the medication “Antabuse” or other forms of disulfiram for the treatment of alcoholism, vapor or skin contact with a gasoline-methanol blend may cause the same kind of adverse reaction as drinking an alcoholic...
  • Page 246 3. After at least 3-5 tankfuls, fill the fuel tank and record the final odometer reading. 4. Use these equations to calculate your fuel economy: English: MPG = (total miles driven) (gallons used) Metric: L/100k = (liters used) (100 kilometers) Comparisons With EPA Estimates EPA fuel economy figures are obtained from laboratory tests under simulated road conditions...
  • Page 247 Self-Service Pointers If you choose to do your own fueling, you should also perform a few simple maintenance routines. This extra effort will save you additional money and contribute to the driving efficiency of your vehicle. The following procedures require only a tire gauge, a rag, an oil can spout and windshield washer fluid.
  • Page 248 Never use: “Non-Detergent” oils Oils labeled API SA, SB, SC, SD, SE, SF or SG Additional engine oil additives, oil treatments or engine treatments Engine oils with an SAE 5W-30 viscosity are PREFERRED for your vehicle. They provide the best engine performance, fuel economy and engine protection for all climates down to -15˚F (-25˚C).
  • Page 249 5. Wipe the dipstick clean and put it back into position, making sure it is fully seated. Engine oil dipstick 6. Carefully, pull the dipstick out again. If the oil level is below the “ADD 1 QT” line, add engine oil as necessary. If the oil level is beyond the letter “F”...
  • Page 250 Changing the Engine Oil and the Oil Filter Change the engine oil and oil filter per the following, whichever occurs first. Refer to the Maintenance Schedule and Record booklet for additional information. NOTE: Always dispose of used automotive fluids in a responsible manner. Follow your community’s standards for disposing of these types of fluids.

  • Page 251: Engine Coolant

    Engine Coolant Checking the Engine Coolant NOTE: Be sure to read and understand Precautions When Servicing Your Vehicle at the beginning of this chapter. The cooling fan is automatic and may come on at any time. Always disconnect the negative terminal of the battery before working near the fan.
  • Page 252 The engine coolant recovery reservoir Checking hoses Inspect all engine and heater system hoses and hose connections for deterioration, leaks, and loose hose clamps as specified in the Maintenance Schedule and Record booklet. Repair or replace with Motorcraft hoses or equivalent as necessary. Adding engine coolant Do not put engine coolant in the container for the windshield washer fluid.
  • Page 253 Never remove the pressure cap while the engine is running or hot. Follow these steps to avoid personal injury that can be caused by escaping steam or engine coolant. 1. Before you remove the cap, turn the engine off and let it cool. Even when the engine is cool, be careful when you remove the pressure cap.
  • Page 254 Ford Premium Cooling System Fluid is an optimized formula that will protect all metals and rubber elastomers used in Ford engines for four years or 50,000 miles (80,000 km). It is not necessary and not recommended to use supplemental coolant additives in your gasoline powered vehicle.
  • Page 255 NOTE: Always dispose of used automotive fluids in a responsible manner. Follow your community’s standards for disposing of these types of fluids. Call your local recycling center to find out about recycling automotive fluids. Use Ford Premium Cooling System Fluid E2FZ-19549-AA (in Canada, Motorcraft CXC-8-B) or an equivalent engine coolant that meets Ford Specification ESE-M97B44-A.
  • Page 256 With the engine OFF and cool, remove the pressure cap, located on the coolant reservoir. Remove the heater hose and clamp, located on the rear of the intake manifold. Add a 50/50 mixture of specified coolant and water to the coolant reservoir. Refer to Refill Capacities later in this chapter for the correct amount.
  • Page 257 Battery Your vehicle may have a Motorcraft maintenance-free battery. When the original equipment battery is replaced under warranty, it may be replaced by a Motorcraft Low-Maintenance Battery. The Low-Maintenance Battery has removable vent caps for checking the electrolyte level and for adding water, if necessary.
  • Page 258 Because your vehicle’s engine is electronically controlled by a computer, some control conditions are maintained by power from the battery. If you ever disconnect the battery or install a new battery, you must allow the computer to “relearn” its idle conditions before your vehicle will drive properly.
  • Page 259 The reservoir for the windshield washer fluid Do not put windshield washer fluid in the container for the engine coolant. Use specially formulated windshield washer fluid rather than plain water, because specially formulated washer fluids contain additives that dissolve road grime. For safety reasons, washer fluids containing an appropriate antifreeze such as methanol should be used in freezing weather (temperatures below 32˚F [0˚C]).
  • Page 260 Wiper Blades Check the windshield wiper blades at least twice a year. Also check them whenever they seem less effective than usual. Substances such as tree sap and some hot wax treatments used by commercial car washes reduce the effectiveness of wiper blades.
  • Page 261 Tires Look at your tires each time you fill your fuel tank. If one tire looks lower than the others, check the pressure in all of them. Always follow these precautions: Keep your tires inflated to the recommended pressures. Stay within the recommended load limits (see Load limits in the Index).

  • Page 262: Tire Rotation

    At least once a month, check the pressure in all your vehicle’s tires, including the spare. Use an accurate tire pressure gauge. Check the tire pressure when tires are cold, after the vehicle has been parked for at least one hour or has been driven less than 3 miles (5 km).
  • Page 263 Rotating the tires NOTE: Use the five tire rotation only when the conventional spare wheel is the same as the road wheels. (Do not mix the steel wheel with aluminum wheels in tire rotation sequence.)
  • Page 264 Replacing the Tires Replace any tires that show wear bands. When your tire shows a wear band, it has only 1/16 inch (2 mm) of tread left. A worn-out tire Because your vehicle’s tires may wear unevenly, you may need to replace them before a wear band appears across the entire tread.
  • Page 265 Information About Tire Quality Grades New vehicles are fitted with tires that have their Tire Quality Grade (described below) molded into the tire’s sidewall. These Tire Quality Grades are determined by standards that the United States Department of Transportation has set.
  • Page 266 Traction A B C The traction grades, from highest to lowest, are A, B, and C, and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
  • Page 267 Snow Tires and Chains The tires on your vehicle have all-weather treads that provide traction in rain or snow. However, during the winter months in some climates, you may need to use snow tires and occasionally chains for your tires. Snow tires must be the same size and grade as the tires you currently have on your vehicle.

  • Page 268: Automatic Transmission Fluid

    Cleaning the Wheels Wash the wheels with the same detergent you use to wash your vehicle’s body. Do not use acid-based wheel cleaners, steel wool, abrasives, fuel, or strong detergents. These substances will damage protective coatings. Use tar and road oil remover to remove grease and tar.
  • Page 269 NOTE: Your vehicle should not be driven if the fluid level is below the bottom hole on the dipstick. Wipe off the dipstick cap, pull the dipstick out and wipe the indicator end clean. Put the dipstick back into the filler tube and make sure it is fully seated.

  • Page 270: Brake Fluid

    Detail of the automatic transmission dipstick Brake Fluid Under normal circumstances, your vehicle should not use up brake fluid rapidly. However, expect the level of the brake fluid to slowly fall as you put more mileage on your vehicle and the brake lining wears.
  • Page 271 If the fluid is low, carefully clean and remove the cap from the reservoir. Fill the reservoir to the MAX line with Ford High Performance DOT 3 Brake Fluid C6AZ-19542-AA, C6AZ-19542-BA, or equivalent DOT 3 fluid meeting Ford specification ESA-M6C25-A. If you use a brake fluid that is not DOT 3, you will cause permanent damage to your brakes.

  • Page 272: Power Steering Fluid

    Power Steering Fluid Check the level of the power steering fluid at least twice a year (i.e., every Spring and Fall). Checking and Adding Power Steering Fluid 1. Start the engine and let it run until the power steering fluid reaches normal operating temperature.
  • Page 273 Fluid level for power steering Use only power steering fluid that meets Ford Specification Mercon ATF XT-2-QDX. If the power steering fluid is low, do not drive your vehicle for a long period of time before adding fluid. This can damage the power steering pump.
  • Page 274 electrical parts, check the appropriate fuses (conventional and high current) or circuit breakers. The following charts tell you which fuses or circuit breakers protect the wiring for each electrical part of your vehicle. If a fuse blows or a circuit breaker opens a circuit, all the parts of your vehicle that use that circuit will not work.
  • Page 275 The Instrument Panel Fuses, Circuit Breakers and Relays...
  • Page 277 These, like fuses, open when the circuit load exceeds their amperage rating. High current fuses may be purchased from your Ford or Lincoln-Mercury dealer. The high current fuse panel is located in the engine compartment near the battery. Always disconnect the battery before servicing high current fuses.
  • Page 278 The high current fuse panel...
  • Page 279 The high current fuses and relays...
  • Page 280 Checking and Replacing Fuses If you need to check a fuse, follow these steps: 1. Find the fuse panel to the left of the steering column. Remove the fuse panel cover to expose the fuse panel. 2. Check the fuse to see if it is blown. Look through the clear side of the fuse to see if the metal wire inside is separated.
  • Page 281 Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. 4. Replace the lower steering column finish panel. Even after you replace a fuse, it will continue to blow if you do not find what caused the overload.
  • Page 282 These, like fuses, open when the circuit lead exceeds their amperage rating. Fuse links may be purchased from your Ford or Lincoln-Mercury dealer. See the following charts to find out which electrical parts are protected by a fuse link.
  • Page 283 The alignment of your headlamps should be checked if: oncoming motorists frequently signal you to turn off your vehicle’s high beams when you do not have the high beams on the headlamps do not seem to give you enough light to see clearly at night the headlamp beams are pointed substantially away from a position slightly down and to the right...
  • Page 284 Headlamp bulb removal Removing the headlamp bulb 1. Make sure that the headlamp switch is in the OFF position. 2. Lift the hood, open access panel above headlamp and find the bulb in the headlamp socket. 3. Remove the electrical connector by pulling off the bulb base.
  • Page 285 High-Mount Brakelamp Bulbs Your vehicle has a brakelamp mounted in the rear window, called a high-mount brakelamp. You may need to remove this lamp at times to replace the brakelamp bulb or to clean the rear window. Parts of the high-mount brakelamp...
  • Page 286 To remove the high-mount brakelamp: 1. Remove the two retaining screws with a Phillips screwdriver. 2. Then lift the whole assembly up and over the retaining brackets. Do not move upper part of plastic attachment brackets. 3. Twist socket counterclockwise to remove from lamp.
  • Page 287 Using the Right Bulbs...

  • Page 288: Emission Control System

    Emission Control System Your vehicle is equipped with a catalytic converter which enables your vehicle to comply with applicable exhaust emission requirements. Exhaust leaks may result in the entry of harmful and potentially lethal fumes into the passenger compartment. Under extreme conditions excessive exhaust temperatures could damage the fuel system, the interior floor covering, or...
  • Page 289 In general, maintenance, replacement, or service of the emissions control devices or systems in your new Ford Motor Company vehicle or engine may be performed at your expense by any automotive repair establishment or individual using automotive parts equivalent to those which your vehicle or engine was originally equipped.
  • Page 290 By law, anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles is not permitted to intentionally remove an emission control device or prevent it from working. In some of the United States and in Canada, vehicle owners may be liable if their emission control device is removed or is prevented from working.
  • Page 291 varies with individual driving patterns. To complete this requirement in the minimum amount of time, refer to the OBD II Drive Cycle defined below. If the vehicle owner cannot or does not want to do the additional driving required by law, a service center can perform this drive cycle as it would any other type of repair work.
  • Page 292 6. Continue to drive the vehicle in city traffic at speeds between 25 and 40 mph (40-64 km/h) for 15 minutes. During the 15 minute drive cycle the following modes must be achieved: a. at least 5 stop and idle modes at 10 seconds each b.
  • Page 293 Refill Capacities, Motorcraft Parts, and Lubricant Specifications Refill Capacities NOTE: Rear axle lube quantities must be replaced every 100,000 miles (160,000 km) or if the axle has been submerged in water. Otherwise, the lube should not be checked or changed unless a leak is suspected or repair required.
  • Page 294 Motorcraft Parts If a spark plug is removed for examination, it must be reinstalled in the same cylinder. For 4.6L (2V) engines: Cylinders #1, #2, #3, #4 have a PG suffix. Cylinders #5, #6, #7, #8 have a P suffix. If a spark plug needs to be replaced, use only spark plugs with the service number suffix letter as shown on the engine decal.
  • Page 295 Lubricant Specifications NOTE: Rear axle lube quantities must be replaced every 100,000 miles (160,000 km) or if the axle has been submerged in water. Otherwise, the lube should not be checked or changed unless a leak is suspected or repair required.

  • Page 296: Vehicle Storage

    Vehicle Storage Maintenance Tips If you plan on storing your vehicle for an extended period of time (60 days or more), refer to the following maintenance recommendations to ensure your vehicle stays in good operating condition. General Store all vehicles in a dry, ventilated place. Protect from sunlight, if possible.
  • Page 297 Lubricate all hood, door and trunk lid hinges and latches with a light grade oil. Cover interior soft trim to prevent fading. Keep all rubber parts free from oil and solvents. Engine Start engine every 15 days. Run at fast idle until it reaches normal operating temperature.
  • Page 298 Battery Check and recharge as necessary. Keep connections clean and covered with a light coat of grease. If storing your vehicle for more than 30 days without recharging the battery, it may be advisable to disconnect the battery cables to ensure battery charge is maintained for quick starting.
  • Page 300 Label Locations...
  • Page 301 Front Exterior View...
  • Page 302 Rear Exterior View...
  • Page 303 Entrance View...
  • Page 304 Driver’s Door...
  • Page 305 Instrument Panel...

  • Page 306: Quick Index

    Instrument Cluster — Mechanical...
  • Page 307 Instrument Cluster — Electronic...
  • Page 308 Trunk...
  • Page 309 4.6L Engine Compartment...
  • Page 310 Index ABS warning light (see Anti-lock brake system) ..Accessory position on the ignition ..37 Accessory power source, power point outlet ..Additives, engine oil .
  • Page 311 Audio system (see Electronic sound system) ..Automatic transmission driving an automatic overdrive ..fluid, adding ... . . fluid, checking ... . fluid, refill capacities .
  • Page 312 Brakes (continued) fluid, specifications ..front disc ....new brake linings... . noise .
  • Page 313 Chime key in ignition ... . . 38 safety belt ... . . Circuit breakers checking and replacing ..see also fuses .
  • Page 314 Cruise control (see Speed control) ..Cupholder(s) ....Customer Assistance Center, Ford (U.S.) ....Customer Assistance Centre, Ford of Canada.
  • Page 315 Emergencies, roadside assistance....battery acid spills ... jump-starting ... . . towing .

  • Page 316: Index 319

    Engine oil (continued) refill capacities ... . specifications ... . . synthetic oil ... . . “break-in”...
  • Page 317 Fuel and distance computer (continued) select button ....75 to empty indicator ... 76 trip distance ....79 trip/reset button .
  • Page 318 Gearshift automatic operation ..column-mounted ... positions ....shift-lock.
  • Page 319 Identification Number, Vehicle (VIN) . . . Idle relearning ....speed ....41 Ignition chime .
  • Page 320 Lamps autolamp delay system ..bulb replacement specifications chart . . checking ....courtesy lamps ... . daytime running light system .
  • Page 321 Lights, warning and indicator (continued) safety belt ... . . trunk ajar ....82 turn signal indicator..Load limits GAWR .
  • Page 322 Odometer description ... . . trip odometer ... . . 60 Oil filter ....Oil (see Engine oil) .
  • Page 323 Radio (see Electronic sound systems) . . . Rear air suspension system ..Rearview mirror... . . Rear window, defroster ..Refill capacities for fluids .
  • Page 324 Safety seats for children and air bags ... . attaching with tether straps ..26 automatic locking mode (retractor) ..28 in center seating positions .
  • Page 325 Speedometer ... . . Starting your vehicle preparing to start your vehicle ..39 starting a cold engine ..40 starting after a collision .
  • Page 326 Towing a trailer (see Trailer towing) . . . Towing your vehicle, with a tow truck ... Traction assist ... . . Traction-lok rear axle .
  • Page 327 Vanity mirror ....Variable interval wipers ..VECI (Vehicle Emission Control Information) decal ....Vehicle Identification Number (VIN) .
  • Page 328 Windshield washer fluid and wipers checking and adding fluid ..checking and replacing wiper blades . . low washer fluid light..81 operation ....reservoir .

  • Page 329: Service Station Information

    Service Station Information...

This manual is also suitable for:

Grand marquis

Table of Contents