AV Link WAV-LJ User Manual

AV EXTENDER
WAV-LJ
(Local)
WAV-RJ
(Remote)
U M
SER ANUAL
Package Contents for WAV-EJ
WAV-LJ Local Unit
WAV-RJ Remote Unit
1 user manual
2 power adapter DC 12V/600mA
1 VGA 1.2M cable (HD-15 Male to Male)
1 Audio 1.2M cable
2 captive screw connectors
4 M4*10mm screws
4 P6*14mm screws
Package Contents for WAV-RJ
WAV-RJ Remote Unit
1 user manual
1 power adapter DC 12V/600mA
1 captive screw connector
2 M4*10mm screws
2 P6*14mm screws
Anything missed, please contact with your vendor.
Features
The extension of video and audio signal up to 300
meter away by using the VIDEO/AUDIO Extender and
one CAT.5 cable.
Equalization length is adjustable.
VGA signal gain is adjustable.
Audio sample rate 96KHz.
Can use external microphone to output sounds to
audio amplifier.

Specifications

Function
VGA In/Out Connector
Audio In/Out Connector
Cable Connector
Max. Resolution
Cable Distance
Power Adapter (Min.)
Housing
Weight
Dimensions (LxWxH)
LOCAL FRONT VIEW
V1.0
1. VGA Input (HD-15 Female Connector)
2. Audio Input
3. MIC Input
4. MIC GAIN – adjust volume of microphone
5. Power LED
WAV-LJ WAV-RJ
HD-15 Female x 2
3.5ψ Stereo Jack x 1
RJ-45 Female
1280x1024 60Hz
300 m (Max.)
DC 12V 600mA
Metal
169 g 172 g
78.2x41.2x52.8 mm
-1-
6. Control H/V signal inverting switch
The default setting of SW1 is "OFF". If SW1 is set to
"ON", the H signal is inverting output.
The default setting of SW1 is "OFF". If SW2 is set to
"ON", the V signal is inverting output.
If the local end changes the logic with the H/V signal
or the logic of the H/V signal, please use then this
function.
LOCAL REAR VIEW
1. Power Connector
2. RJ-45 Connector
REMOTE FRONT VIEW
1. VGA Output (HD-15 Female Connector)
2. Audio Output
3. EQ – Equalization length adjust (Adjust it and weak
characters be sharp)
4. GAIN – Adjust brightness
5. Power LED
6. Control H/V signal inverting switch
The default setting of SW1 is "OFF". If SW1 is set to
"ON", the H signal is inverting output.
The default setting of SW1 is "OFF". If SW2 is set to
"ON", the V signal is inverting output.
If the local end changes the logic with the H/V signal
or the logic of the H/V signal, please use then this
function.
-2-