Vantec NexStar HX4R User Manual page 13

Individual(Normal) Drive Mode:
This mode enables each Hard Drive to be seen
as separate single drives with separate Hard
Drive capacities.
( figure 7-A)
NOTE:
If you are using Indvidual Drive Mode with
eSATA interface, your eSATA port on the system
must support Port Multiplier to see more than
one drive.
Volume A Volume B
NST-640S3R-BK
Port 1 Port 2
Drive A Drive B
Equal Disks
( figure 7-B)
Volume C Volume D
Port 3 Port 4
Drive C Drive D
RAID Mode Configuration
Normal
ON
( figure 7-A)
Volume A Volume B
NST-640S3R-BK
Port 1 Port 2
Drive A Drive B
Unequal Disks
11
Volume D
Volume C
Port 3 Port 4
Drive C
Drive D
( figure 7-B)