Introduction; Package Contents; Configuration Interface System Requirements; Hardware Overview - Ubiquiti EdgeRouter Lite ERLite-3 User Manual

EdgeRouter Lite User Guide
™

Chapter 1: Overview

Introduction

Thank you for purchasing the Ubiquiti EdgeRouter
model ERLite-3. It is part of the EdgeMAX
more information, visit www.ubnt.com/edgemax.
The EdgeRouter is a router that provides a variety of
features, including routing, security, Virtual Private
Networking (VPN), monitoring and management
services, and Quality of Service (QoS). For more detailed
specifications, refer to "EdgeOS" on page 47.
This User Guide is designed to provide instructions about
installation of the EdgeRouter and to provide details about
how to use the EdgeOS Configuration Interface.
™
Configuration
The intuitive interface allows you to conveniently manage
your EdgeRouter using your web browser. (See "Using
EdgeOS" on page 5 for more information.) If you need
to configure advanced features or prefer configuration by
command line, you can use the Command Line Interface
(CLI). (See "Command Line Interface" on page 37 for
more information.)

Package Contents

EdgeRouter Lite
EdgeRouter Lite
M2.9x20 Screws M2.9 Anchors
(Qty. 2)
Configuration Interface System
Requirements
• Microsoft Windows XP, Windows Vista, Windows 7,
Windows 8, Linux, or Mac OS X
• Web Browser: Google Chrome, Mozilla Firefox, or
Microsoft Internet Explorer 8 (or above)
Ubiquiti Networks, Inc.
™
platform. For
™
Power Adapter Power Cord
(12V, 1A)
3-Port Router
Model: ERLite-3
Quick Start Guide
(Qty. 2)

Hardware Overview

Back Panel
Lite,
Front Panel Ports
Console
CONSOLE
Interface
Console
Ethernet (0-2)
Reset
Front Panel LEDs
The LEDs on the left side of each port are not used at this
time. Below is a description of the right LED functionality:
Power
CONSOLE
LED
Power
Speed/
Link/Act
Chapter 1: Overview
Ventilation Holes
Ethernet (0-2)
0 1 2
Description
RJ45 serial console port for Command Line Interface
(CLI) management.
10/100/1000 Mbps Ethernet ports.
To reset to factory defaults, disconnect the Power
Adapter from the Power port. Press and hold the
Reset button while connecting the Power Adapter
to the Power port. Keep holding the button until the
right LED on port 2 starts flashing and then stops
after a few seconds.
Speed/Link/Act Speed/Link/Act
1000 Mbps 10/100 Mbps
0 1 2
State Status
Off EdgeRouter Lite not powered on.
Green EdgeRouter Lite is powered on.
Off No Link
Amber Link Established at 10/100 Mbps
Amber Flashing Link Activity at 10/100 Mbps
Green Link Established at 1000 Mbps
Green Flashing Link Activity at 1000 Mbps
Power
12V DC
GROUND
Grounding Hole with
Grounding Screw
Reset
SPEED
SPEED
1