(7) Positioning the thread nipper
The clearance between thread nipper
operation.
0.4 to 0.6mm
(8) Adjusting the stitch selecting mechanism
1. Open the side cover (left). Change the number of stitches with stitch adjusting screw
lever
(accessory part).
(1) Adjusting the mechanism for 8 stitches
(3) Adjusting the mechanism for 32 stitches
Standard Adjustment
and nipper block
should be 0.4 to 0.6 mm while the machine is in
Standard Adjustment
(2) Adjusting the mechanism for 16 stitches
– 8 –
and stitch adjusting