Transducer Connections - Raymarine DSM400 Installation Manual

2.3 Transducer connections

WARNING: Transducer cable
Removing the transducer cable(s) from the unit while powered ON can cause sparks. Only remove a
transducer cable after the unit has been powered OFF.
The following diagram shows the layout of the transducer connections within your DSM400 Digital Sounder Module:
CUSTOM CONFIG.
TRANSDUCER 2 HIGH
TRANSDUCER 2 LOW
TRANSDUCER 1 HIGH
TRANSDUCER 1 LOW
4
18
Watertight bungs supplied with your unit
should be fitted to any unused connectors
2
3
POWER
GROUND
Br Gr Wh Re G T˚ Id
Speed
Transducer
www.busse-yachtshop.de | info@busse-yachtshop.de
1
TRANSDUCER 1 HIGH TRANSDUCER 1 LOW
SHIELD SHIELD
G T˚ Id
5
Depth 1
Raymarine DSM400 Digital Sounder Module
Earth/
Ground
TRANSDUCER 2 HIGH TRANSDUCER 2 LOW
SHIELD SHIELD
Depth 2
D10982-2