Advanced Bios Features Page - IBM Motherboard User Manual

Drive A
These items define the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Video
The item defines the video mode of the system. This motherboard has a built-in
VGA graphics system; you must leave this item at the default value.
Halt On
This item defines the operation of the system POST (Power On Self Test)
routine. You can use this item to select which types of errors in the POST are
sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These
are display-only fields. You cannot make changes to these fields.

Advanced BIOS Features Page

This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
CPU Feature
Hard Disk Boot Priority
CPU L1 & L2 Cache
CPU L2 Cache ECC Checking
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Typematic Rate Setting
Typematic Rate (Chars/Sec)
X
Typematic Delay (Msec)
X
Security Option
MPS Version Control For OS
OS Select For DRAM > 64 MB
Video BIOS Shadow
: Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
Chapter 3: BIOS Setup Utility
Phonex-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
[Press Enter]
[Press Enter]
[Enabled]
Menu Level
[Enabled]
[Enabled]
[Floppy]
[LS120]
[CDROM]
[Enabled]
[Disabled]
[Disabled]
[On]
[Disabled]
6
250
[Setup]
[1.4]
[Non-OS2]
[Enabled]
19
Help Item