IBM Motherboard User Manual page 28

AGP Aperture Size
This item defines the size of the aperture if you use an AGP graphics adapter. The
AGP aperture refers to a section of the PCI memory addres range used for graphics
memory. We recommend that you leave this item at default value.
AGP 3.0 Mode
This item defines the AGP 3.0 mode.
AGP Driving Control
Use this item to set AGP driving work mode.
AGP Driving Value
Use this item to control AGP driving computation way. Only when AGP
Driving Control is enabled.
AGP Fast Write
Use this item to enable or disable AGP Fast Write function. Enable this item to
improve AGP efficiency.
AGP Master 1 WS Write/Read
Disable this item to make AGP Master delay the operation of data write/read.
CPU & PCI Bus Control (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
PCI Master 0 WS Write
PCI Delay Transaction
VLink mode selection
VLink 8X Support
DRDY_Timing
: Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
Chapter 3: BIOS Setup Utility
Phonex-AwardBIOS CMOS Setup Utility
CPU & PCI Bus Control
[Enabled]
[Enabled]
Menu Level
[By Auto]
[Enabled]
[Default]
25
Help Item