INSTALLATION & OPERATION MANUAL
1. ENGINE MOUNTING REQUIRMENTS
§ The mount must be strong enough to carry the loads applied by the weight and power of the
engine. It also must be stiff enough that the engine does not sag or move too much when
power is applied.
§ The mount must position the engine at the correct height and angle so that the engine's
thrust line suits the boat.
2. ENGINE MOUNT DIMENSIONS
!
!
D170 and D150 Series Engines
CHAPTER 2
ENGINE MOUNT SYSTEM
USE ONLY THE ORIGINAL HYUNDAI SeasAll MOUNTINGS THAT WERE
USE ONLY THE ORIGINAL HYUNDAI SeasAll MOUNTINGS THAT WERE
SUPPLIED WITH THE INITIAL PURCHASE.
SUPPLIED WITH THE INITIAL PURCHASE.
AFTER INSTALLATION AND ALIGNMENT OF THE ENGINE, MAKE SURE
AFTER INSTALLATION AND ALIGNMENT OF THE ENGINE, MAKE SURE
THAT NO RESIDUAL TENSION EXISTS IN THE DRIVETRAIN.
THAT NO RESIDUAL TENSION EXISTS IN THE DRIVETRAIN.
CAUTION
CAUTION
-15-