Setting The Rinse Aid Level; Filling With Dishwasher Detergent - Baumatic BDW65S Instruction Manual

Setting the rinse aid level

The amount of rinse aid that the dishwasher requires also depends on
the hardness of your water. You should experiment with the rinse aid
setting, until you find a level that gives the best results.
o You should continue to adjust the rinse aid level upwards until
you get no water spots.
o If you get cloudiness or streaking on your dishes, the rinse aid
level is set too high and it is causing foaming during the wash
cycle. Turn the arrow clockwise and lower the setting to the next
number.

Filling with dishwasher detergent

The detergent dispenser must be refilled at the start of each wash
cycle (apart from the Rinse wash program).
o Push the latch on the side of the dispenser to open the lid and
place the detergent inside of the dispenser.
o On the first wash cycle, we
would recommend
rinse aid level is set to number
4.
o If you get water spots and
poor drying performance, then
you should turn the arrow
anticlockwise and increase the
setting to the next number.
that the
14