Disarming; Entry Delay Timer - Paradox Magellan User Manual

Disarming

When your system is disarmed, it deactivates any alarms in progress and it deactivates the zones so an alarm will not be triggered if
zones are breached.

Entry Delay Timer

Your installer will program designated entry points (i.e. the front door) with an Entry Delay timer. This delay gives you time to enter
the armed premises and enter your User code to disarm your system before the alarm is triggered. Up to two Entry Delay Timers can
be programmed in your Magellan console.
Programming the Entry Delay Timer
Program the Entry Delay Timer with a value that will give you ample time to disarm your system before the alarm is triggered.
Only the System Master user can program the Entry Delay Timer. To program the timer:
menu
Disarming an Armed System
When an entry point, like the front door, is opened, Magellan will
produce a sound indicating that the system has started the Entry
Delay timer (page 12). If a valid User code is entered before the
Entry Delay timer elapses, your system will disarm and will not
generate an alarm. To disarm an armed system:
12
System
Master code
ok ok
Entry Delay
from 001 to
255 seconds
Enter
designated
entry point
next ok ok
Press Press to
until program
desired Entry
tone Delay 2
User code
User Guide