Arming And Disarming Options; Switch To Stay Arming If No Entry Delay Is Opened; When Delay Zone Is Bypassed Follow Zones Become Entry Delay 2; Regular Arming Switches To Force Arming - Paradox Magellan MG5050 EN Reference & Installation Manual

10.1

Switch to Stay Arming if no Entry Delay is opened

Section [741]: Partition 1, Section [742] = Partition 2
Option [5] OFF = Switch to Stay Arming Disabled (default)
Option [5] ON
If a user Regular arms a partition, but does not exit through (open and close) an entry delay zone during the exit delay, the control
panel can be programmed to switch from Regular arming to Stay arming.
10.2

When Delay Zone is bypassed Follow Zones become Entry Delay 2

Section [741]: Partition 1, Section [742] = Partition 2
Option [6] OFF = Follow zones become entry delay 2 when delay zone is bypassed disabled (default)
Option [6] ON
If a user has an entry point defined as a delay, and a motion detector set as a follow zone, this option allows the user to bypass a
delay zone so that the motion detector becomes an entry delay 2 zone. For example, if a user has a malfunctioning door contact,
they can bypass the delay zone and have the motion detector become an entry delay 2 zone so that they have sufficient time to
disarm the system. All follow zones become entry delay 2 if at least one delay zone is bypassed.
10.3

Regular Arming switches to Force Arming

(Not to be used with UL Installations)
Section [704]: Arming/Disarming Options
Option [1] OFF = Regular Arming Switches to Force Arming Disabled
Option [1] ON
With this feature enabled, the control panel will always Force arm (if a force-enabled zone is open, see Force Zones on page 29)
instead of Regular arm when a valid user access code with the Force Arming Option is entered.
10.4

Stay Arming switches to Stay Force Arming

(Not to be used with UL Installations)
Section [704]: Arming/Disarming Options
Option [2] OFF = Stay Arming Switches to Stay Force Arming Disabled
Option [2] ON
With this feature enabled, the control panel will always Stay Force arm (if a force-enabled zone is open, see Force Zones on page
29) instead of Stay arm when a valid user access code with the Force Arming Option is entered.
10.5

Sleep Arming switches to Sleep Force Arming

(Not to be used with UL Installations)
Section [704]: Arming/Disarming Options
Option [3] OFF = Sleep Arming Switches to Sleep Force Arming Disabled
Option [3] ON
With this feature enabled, the control panel will always Sleep Force arm (if a force-enabled zone is open, see Force Zones on
page 29) instead of Sleep arm when a valid user access code with the Force Arming Option is entered.
10.6

Restrict Arming on Battery Failure

Section [703]: Arming/Disarming Options
Option [5] OFF = Permit arming on battery failure (default)
Option [5] ON
If this option is enabled, the control panel will not arm the system if the control panel detects that the backup battery is
disconnected, that its fuse is blown, or that the battery voltage drops to less than 10.5V. The control panel will not arm the system
until all battery trouble conditions are rectified.
10.7

Restrict Arming on Tamper Failure

Section [703]: Arming/Disarming Options
Option [6] OFF = Permit arming on tamper failure (default)
Option [6] ON
If this option is enabled, the control panel will not arm the system if the control panel detects a tamper trouble on one or more
zones. The control panel will not arm the system until all tamper trouble conditions are rectified.
This feature will not function if the tamper recognition options (see Tamper Recognition on page 43) are disabled
or whenever the tampered zone is bypassed and the tamper bypass options have been enabled (see Tamper
Bypass Options on page 44).
Part 10: Arming and Disarming Options
= Switch to Stay Arming Enabled
= Follow zones become entry delay 2 when delay zone is bypassed enabled
= Regular Arming Switches to Force Arming Enabled (default)
= Stay Arming Switches to Stay Force Arming Enabled (default)
= Sleep Arming Switches to Sleep Force Arming Enabled (default)
= Restrict arming on battery failure
= Restrict arming on tamper failure
Magellan / Spectra SP
39