Ip Filtering; Mac Filtering - D-Link DCM-604 Series User Manual

DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor
User's Manual
page. For example, if this IP address were 211.20.15.28, you would navigate to http://
211.20.15.28:8080 to reach the DCM-604's Web Management page from a remote
location.

Multicast Enable: To enable multicast traffic to pass through between WAN and LAN.
You may need to enable this to see some types of broadcast streaming and content
on the Internet, such as webcasting of a popular live event.

UPnP Enable: UPnP (Universal Plug and Play) offers pervasive peer-to-peer network
connectivity of PCs of all form factors, intelligent appliances, and wireless devices.
UPnP architecture leverages TCP/IP and the Web to enable seamless proximity
networking in addition to control and data transfer among networked devices in the
home, office, and everywhere in between.

5.4.2 IP Filtering

The IP Filtering page enables you to enter the IP address ranges of PCs on your LAN that
you don't permit to have outbound access ability to the WAN. These PCs can still
communicate with each other on your LAN, but packets they originate to WAN addresses
are blocked by the DCM-604.
To enable IP Filtering feature of DCM-604, check the Enable box and click Apply button.

5.4.3 MAC Filtering

The MAC Filtering page enables you to enter the MAC address of specific PCs on your
LAN that you don't permit to have outbound access ability to the WAN. These PCs can
still communicate with each other through the DCM-604, but packets they send to WAN
addresses are blocked.
14