Using Your Washing Machine; Switch The Machine On; Load The Laundry; Measure Out The Detergent - John Lewis JLWD 1408 Instruction Manual

Using the washing machine
Before the first wash, we recommend that you run a cotton
cycle at 90°C, without any laundry in the machine, to
remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer
and start the machine.
WASHING 7 KG OF WHITE COTTON AT 90°C
Suppose you have 7 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.

1.Load the laundry

Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
the main wash compartment
If you wish to carry out the prewash or a soak
programme, pour detergent into the appropriate
compartment marked

3.Measure out the fabric softener

If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
Close the drawer gently.
.
.

4. Switch the machine on

Turn the selector dial to the the desired position to
switch the machine on. To switch the appliance off turn
it to "Off".
5. Select the desired
programme/temperature
Turn the selector dial to 90° programme. The lights
relevant to the phases that form the programme will
light up.
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The Start/Pause button
light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.
If your laundry needs a soak time, turn the programme
selector dial to "Soak 30°" and then, before starting a
washing cycle, empty the water as described in the
"Soak 30°" paragraph.
6. Select the spin speed or the
"Rinse hold" option
Press the "Spin" button repeatedly button in order to
select the desired spin speed or the "Rinse hold"
option. If you select the "Rinse hold" option, the last
rinse water is not emptied out.
16