Using The Washing Machine; Load The Laundry; Measure Out The Detergent; Measure Out The Fabric Softener - John Lewis JLBIWM1401 Instruction Manual

Built-in 1400 spin
Table of Contents

Advertisement

Using the washing machine

Before the first wash, we recommend that you run a cotton
cycle at 95°C, without any laundry in the machine, to
remove any manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the dispenser drawer
and start the machine.
WASHING 5 KG OF WHITE COTTON AT 95°C
Suppose you have 5 kg of laundry to wash. It is white
cotton and is suitable for high temperature washing.

1.Load the laundry

Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure
out the amount of detergent required and pour it into
the main wash compartment
If you wish to carry out the prewash, a soak or a stain
phase, pour detergent into the appropriate
compartment marked
Important!
Do not use normal detergent for the "Stain" option,
always use a STAIN remover.

3.Measure out the fabric softener

If required, pour fabric softener into the compartment
marked
, without exceeding the «MAX» mark.
.
(Prewash).
Close the drawer gently.

4. Switch the machine on

To switch the machine on, press the O
the mains-on light comes on. To switch the appliance
off, depress the same button.
If the programme selector dial is on the "Off" (Reset)
position, three flashing dashes will be displayed. If the
programme selector dial is positioned on a wash
programme, a flashing zero appears on the display.
5. Select the desired
programme/temperature
Turn the selector dial to 95° programme. The lights
relevant to the phases that form the programme will
light up.
The display will show the duration of the selected
programme, calculated on the basis of the maximum
load for each type of fabric. The Start/Pause button
light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate the
duration relevant to the maximum load. The duration
value will be gradually adjusted during the cycle.
If your laundry needs a soak time, turn the programme
selector dial to "Soak 30°" and then, before starting a
washing cycle, empty the water as described in the
"Soak 30°" paragraph.
20
/O
button:
N
FF

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jlbiwm 1401

Table of Contents