Table of Contents
Advertisement
The light End illuminates at the end of the
washing cycle.
First use
• Ensure that the electrical and water
connections comply with the
installation instructions.
• Remove the polystyrene block and
any material from the drum.
• Pour 2 litres of water into the main
wash compartment
detergent drawer in order to
activate the ECO valve. Then run a
cotton cycle at the highest
temperature without any laundry in
the machine, to remove any
manufacturing residue from the
drum and tub. Pour 1/2 a measure
of detergent into the main wash
compartment and start the
machine.
Daily use
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out as
much as possible. Close the door.
of the
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the JLWM 1200 and is the answer not in the manual?
Questions and answers
Which setting on the JLWM1200 does a wash and rinse without having to switch options
The "RINSE HOLD" setting on the John Lewis JLWM 1200 allows for a wash and rinse without switching options. It is available for multiple programs, including synthetics, delicates, and wool, ensuring that the wash cycle completes without immediately proceeding to the final spin.
This answer is automatically generated
Does the programme you select automatically switch to rinse and drain or do you have to do it manually?
The John Lewis JLWM 1200 does not automatically switch to rinse and drain if a programme or option that ends with water left in the tub has been selected. In such cases, the door remains locked, and the water must be manually drained by selecting the appropriate programme.
This answer is automatically generated