Table of Contents
Advertisement
Detergent dispenser drawer
Compartment for detergent used for
prewash and soak phase or for stain remover
used during the stain action phase (if
available). The prewash and soak detergent is
added at the beginning of the wash
programme. The stain remover is added
during the stain action phase.
Compartment for powder or liquid
detergent used for main wash. If using liquid
detergent pour it just before starting the
programme.
Compartment for liquid additives (fabric
softener, starch).
Follow the product manufacturer's
recommendations on quantities to use and do
not exceed the «MAX» mark in the
detergent dispenser drawer. Any fabric
softener or starching additives must be
poured into the compartment before starting
the wash programme.
Control panel
Below is a picture of the control panel.
It shows the programme selector dial
as well as the buttons, pilot lights and
the display. These are presented by
relevant numbers on the following
pages.
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the JLWM 1200 and is the answer not in the manual?
Questions and answers
Which setting on the JLWM1200 does a wash and rinse without having to switch options
The "RINSE HOLD" setting on the John Lewis JLWM 1200 allows for a wash and rinse without switching options. It is available for multiple programs, including synthetics, delicates, and wool, ensuring that the wash cycle completes without immediately proceeding to the final spin.
This answer is automatically generated
Does the programme you select automatically switch to rinse and drain or do you have to do it manually?
The John Lewis JLWM 1200 does not automatically switch to rinse and drain if a programme or option that ends with water left in the tub has been selected. In such cases, the door remains locked, and the water must be manually drained by selecting the appropriate programme.
This answer is automatically generated