Advertisement
Quick Links
http://www.myronanddavis.com
Installation Instructions
Toyota Venza
NV7TVZ1
INSTALLATION INSTRUCTIONS AND USE
The Myron & Davis In-Dash Navigation System includes
a built in DVD player that should not be viewed by the
driver while driving to avoid violation of State and Local
Laws. This product should be installed by a professional
to ensure proper installation and operation.
Myron & Davis is not responsible for any potential accidents,
property damage or bodily harm resulting from improper
installation or operation.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Myron & Davis NV7TVZ1
Summary of Contents for Myron & Davis NV7TVZ1
- Page 1 Installation Instructions Toyota Venza NV7TVZ1 INSTALLATION INSTRUCTIONS AND USE The Myron & Davis In-Dash Navigation System includes a built in DVD player that should not be viewed by the driver while driving to avoid violation of State and Local Laws.
- Page 2 - Digital Multi – Meter - Philips screwdriver set - Trim Removal tools - ¼” drive sockets - Torx or Allen wrenches - A functional DVD or CD Myron and Davis Entertainment Systems Multi-Media Navigation System Installation Guide NV7TVZ1 Rev A...
-
Page 3: Installation Instructions
Installation Instructions 2- Caution -Battery Check the battery to ensure it is fully charged. NOTE: Some new vehicles batteries are not fully charged and may cause improper operation 3 - Warning - Remove the key from the ignition - Disconnect the negative battery terminal - Care must be used working with vehicles with airbags to prevent: - injury - damage to or malfunction of the airbag system... - Page 4 4 – Removal Of The Dash Trim Cont’d. Original OEM Dash Step 1 - Unclip and remove panel Step 2 - Remove the philips screw to the right of the shifter at the bottom of the climate control Step 3 -Remove climate control Step 6 -...
- Page 5 5 – Removal Of The OEM Radio Remove the OEM Radio and prepare the Myron and Davis Unit for installation by following the steps below. Note: Inspect all fasteners and brackets for damage. Replace as necessary before the installation process is started. Step 1- Remove the 4 bolts securing the factory radio and remove the OEM Radio.
- Page 6 6 - Satellite Radio, iPod interface and GPS Antenna The GPS and Optional Satellite Radio Antenna should be mounted on the exterior of the vehicle and optional iPod interface connector in a user friendly location within the vehicle cabin. Follow the steps below for proper installation. Note: Avoid routing the GPS harness near to other power sources to ensure peak operation...
- Page 7 7 - Connecting and installing the Myron & Davis unit Follow the steps below to ensure proper installation and connection of the Myron & Davis unit. Note: To ensure that the video cannot be viewed when the vehicle is in motion, connect the (blue/white) Brake Wire to the Emergency Brake Switch (grounded when...
- Page 8 8 – Re- Install Interior Trim Components 8 – Re-installing the Dash Trim Replace the dash trim in reverse order of removal. Use care not to damage or mar the surfaces.
Need help?
Do you have a question about the NV7TVZ1 and is the answer not in the manual?
Questions and answers