Notes On Connecting/Disconnecting Cables - Fujitsu Primergy CX400 S2 Operating Manual

5.5

Notes on connecting/disconnecting cables

V
CAUTION!
Always read the documentation supplied with the device you wish to
connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always take hold of the
cable by the plug.
Follow the sequence described below to connect or disconnect external
devices to or from the server enclosure:
Be sure to wait for 10 seconds or more after shutdown before turning the
server enclosure on.
Connecting cables
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the properly grounded power outlets.
Ê Connect all cables to the server enclosure and peripherals.
Ê Plug all data communication cables into the utility sockets.
Ê Plug all power cords into the properly grounded power outlets.
Disconnecting cables
Ê Turn off all power and equipment switches.
Ê Disconnect all power plugs from the properly grounded power outlets.
Ê Unplug all data communication cables from the utility sockets.
Ê Disconnect the relevant cables from the server enclosure and all the
peripherals.
I
For connecting or disconnecting LAN cables, the server enclosure does
not need to be powered off. To avoid loss of data teaming function has to
be enabled.
CX400 S2
Operating Manual
Hardware installation
43