Fujitsu Primergy CX400 S2 Operating Manual page 50

Starting up and operation
No. Function
1
2 ID indicator
2
Table 3: Power-on indicator and ID indicator
Power-on indicator (green)
Lights up green when the server enclosure is switched ON.
Flashes green if the server node has been switched on and is in
an error state.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
ID ID button
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. Both ID indicators are synchronized.
50
Status
Green/Orange LED:
alternate flashing
Blue LED: flashing
Blue LED: off
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the multi-node server
system from the mains voltage. To disconnect from the
mains completely, remove the power plug(s).
Operating Manual
Description
Power on and fault
Select mode
Normal mode
CX400 S2