Page 1
Basiq BP430 User’s Manual Manuel de l’utilisateur Anwenderhandbuch Manuale per l’operatore Manual del usuario...
Page 2
Remove the existing power supply from your computer case and replace it with your new Antec power supply. (Illustration 1) Turn the hard switch on the Antec power supply to the OFF (O) position and connect the AC power cord to the power supply.
Page 3
Connect the 24-pin Main Power Connector (Illustration 2). If the mother- board uses a 20-pin connector, detach the 4-pin attachment on the 24-pin power connector (see pictures 1 and 2). Note: the detachable 4-pin section cannot be used in place of a 4-pin +12V connector. Connect the 4-pin (Illustration 3) 12V connector to the motherboard as needed.
Need help?
Do you have a question about the Basiq BP430 and is the answer not in the manual?
Questions and answers