Media Shield
5. Pull a short length of media out of the printer. Close the Media
Cover and press until you hear a click, to properly latch:
AME-3230 & AME-3230B User's Manual
Media Cover
17
6. Tearing Media:
To tear media, pull the media edge against the Tear Bar as in the
direction below:
Wearing Belt Strap
The convenient Belt Strap design, a standard feature of Argox
AME-3230 and AME-3230B, is easy to use and quick to install:
1. Prepare the Belt Strap and the Screw.
Locate the Knob on the underside of the printer, right above the
Battery Cover:
AME-3230 & AME-3230B User's Manual
Tear Direction
Tear Bar
18