Wearing Belt Strap - Argox AME-2230B User Manual

5. Pull a short length of media out of the printer. Close the Media
Cover and press to properly latch until you hear a click:
6. Tearing Media:
To tear media, pull the media edge against the Tear Bar as in the
direction below:
AME-2230B & AME-3230B User's Manual
Media Cover
Tear Direction
Tear Bar
17

Wearing Belt Strap

Considering convenience of operators, the Belt Strap design is easy
to use and quick to install, as a standard feature of Argox AME-2230B
and AME-3230B:
1. Prepare the Belt Strap and the Screw.
Find the Knob located at the printer bottom, right above the
Battery Cover:
Belt Strap
AME-2230B & AME-3230B User's Manual
Screw
18
Knob