Smart Battery Power Management; Connecting The Printer - Argox AME-3230 User Manual

Smart Battery Power Management

The AME-3230B mobile printer is equipped with a Li-ion battery
pack (7.4V 2200mAH). With the Smart Battery Power Management
function, AME-3230 and AME-3230B are able to monitor and
automatically remind operators of different battery power status:
Battery
Power
Status
Battery Green LED remains On (Charging Mode)
Charging
Mode If Battery is fully charged, LED will be off.
Battery LED blinks slowly
10% (Reminder:
battery power will be 5% in about 30-60 minutes)
Battery LED blinks + warning beeps
5% (Reminder:
battery power will be 0% in about 30-60 minutes)
Printer suspends printing
0%
(some minor power remains)
Note:
1. If the standby duration exceeds 3 minutes, printer will turn off
automatically in order to decrease power consumption.
2. The standby duration is changeable, to be set by operators;
printer's default standby duration is 3 minutes.
AME-3230 & AME-3230B User's Manual
Printer's Indications
27

Connecting the Printer

The interfaces of AME-3230 and AME-3230B include RS-232, USB
(2.0), and IrDA.
The interfaces of AME-3230 and AME-3230B include RS-232, USB
(2.0), IrDA, and Bluetooth 2.0.
USB and RS-232 communication cables are optional accessories.
USB & RS-232 Communications:
No additional setups are required for cable communications.
Note: Turn off the printer before connecting or disconnecting USB
or RS-232 interface cables
USB:
Once USB cable is connected, printer will detect
automatically and link to host, without emitting beeps.
RS-232:
When printer is off and RS-232 cable is connected, printer
will emit 3 beeps and automatically switch to RS-232
mode. Next time printer is turned on with RS-232 cable
connected, printer will emit 1 beep (Bluetooth mode), and
then 3 beeps to indicate RS-232 mode.
When RS-232 cable is disconnected, printer will emit 1
beep and switch back to Bluetooth mode.
AME-3230 & AME-3230B User's Manual
28