Cleaning The Media Sensor; Specifications; General Specifications - Argox AME-3230 User Manual

3. Cleaning Direction:
When cleaning the print head, always wipe in One Direction -
from Left to Right only, or, from Right to Left only, to gently clean
the "Heating Line" of the print head without putting excessive
stress on the unit.
Do not wipe back and forth to avoid dust or dirt on the cleaning
cloth/cotton buds attaching to print head again.

Cleaning the Media Sensor:

Debris or dirt on the Media Sensor can cause a misread or unstable
detection to index label gaps/black marks. Clean the Media Sensor
properly with a cotton bud dampened with alcohol.
AME-3230 & AME-3230B User's Manual
37

Specifications

General Specifications

AME-3230
Specifications
Printing
Method
Printing
Resolution
Printing Speed
Printing Length
Printing Width
8MB DRAM (6MB User available),
Memory
4MB Flash ROM (3MB User available)
CPU Type
Media gap/black line sensor, Paper end sensor,
Media Sensor
Operation
(Power status/Battery/Media/Communication),
Interface
Communication
RS-232, USB (2.0), IrDA
Interface
AME-3230 & AME-3230B User's Manual
AME-3230B
Direct Thermal
203 dpi (8 dots/mm)
2~ 3ips (51 ~76mm/s)
40" (1016mm)
2.8" (72mm)
32 bit RISC microprocessor
Open cover sensor
LED indicator x 4
Button x 2 (Power/Feed)
RS-232, USB (2.0),
IrDA, Bluetooth 2.0
38