System Hardware Health Management Setup - American Megatrends Olympus Pentium II PCI ISA Manual

System Hardware Health Management Setup

AMIBIOS can monitor system health parameters such as CPU temperature,
CPU voltage levels, and fan speed. You can set the acceptable upper and lower
limits for all hardware health parameters by choosing System Hardware Health
Management Setup from the AMIBIOS Setup main menu. The following
appears. You can set the Low Alert, High Alert, Low Warning, and High
Warning levels for each system health parameter. To change a setting, highlight
the field to be changed. Press + or <Ctrl> + to raise the value. Press - or <Ctrl> -
to lower a value.
Physical Low
Parameter Alert
Ambient Temp 00
(Deg. C)
VCCP 2.5V 2.00
(Volts)
VTT 1.5V 1.00
(Volts)
VCC3 +3.3V 3.00
(Volts)
VCC +5V 4.50
(Volts)
Board +12V 11.50
(Volts)
Board -12V -12.50
(Volts)
Board -5V -5.50
(Volts)
CPU fan speed 1600
(RPM)
Gen fan speed 0800
(RPM)
↑→↓←: Navigate +/-/Ctrl+/Ctrl-:Edit Esc: Exit F1: Help
High Low High
Alert Warning Warning
99 00 99
3.00 2.00 3.00
2.00 1.00 2.00
3.60 3.00 3.60
5.50 4.50 5.50
12.50 11.50 12.50
-11.50 -12.50 -11.50
-4.50 -5.50 -4.50
1800 1500 2000
0900 0500 0900
Current
Value
38
2.76
0.27
3.42
5.10
12.29
-12.29
-4.78
1675
0820
Cont'd
Chapter 2 AMIBIOS Setup 69