Specifications - Powermatic 66 Maintenance Instructions And Parts List

Table with standard
extensions 28"
x
38"
SPECIFICATIONS
Rip Fence 1-1/2"
x
2-1/2"
x
33" Maximum width
cutoff in front of saw
in 3-1/8" stock.
Arbor diameter
Saw Blade diameter
Blade tilt maximum
Maximum depth
of cut
Maximum cut with
standard extensions
to the right of saw
blade.
5/8"
10"
90
0
:
3-1/8"
45
0
:
2-1/8"
25"
Maximum width of 15"
cutoff in front of
saw in 1" stock.
Maximum width
of dado cut.
Maximum motor.
Maximum speed of 10"
saw blade.
Table height to floor.
Net wt. with motor.
Shipping wt. with
motor.
12-1/4"
13/16"
3 HP,
3600 RPM.
11000 SFM.
34"
450 lbs.
500 lbs.
NOTE: The above specifications were current at the time that this manual was published, but
because of our policy of continuous improvement, Powermatic Houdaille, Inc., reserves
the right to change specifications without notice and without incurring obligations.
t -
q .- -_ _
2. ·.........-r-----;