Introduction; Specifications - Powermatic 2415 Operating Instructions And Parts Manual

Introduction

This manual is provided by Walter Meier (Manufacturing), Inc. covering the safe operation and
maintenance procedures for a Powermatic Model 2013 or 2415 Band Saw. This manual contains
instructions on installation, safety precautions, general operating procedures, maintenance instructions
and parts breakdown. This machine has been designed and constructed to provide years of trouble free
operation if used in accordance with instructions set forth in this manual. If there are any questions or
comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at
our web site: www.waltermeier.com.

Specifications

Model Number ................................................................ 2013.................................................... 2415
Stock Number (2HP, 1Ph, 230V) ..................................1791257........................................................ na
Stock Number (3HP, 1Ph, 230V) ........................................... na...............................................1791259
Stock Number (3HP, 3Ph, 230/460V*)...........................1791258........................................................ na
Stock Number (5HP, 3Ph, 230/460V*).................................... na...............................................1791260
Blade Speeds (SFPM) ..................................... 2,000 and 4,000................................... 2,000 and 4,000
Thickness Capacity, Maximum (in.) .................................. 12-3/8.................................................. 14-3/8
Width Capacity, Maximum (in.) .............................................. 20........................................................ 24
Table Size (in.) ..............................................................24 x 24.................................................24 x 28
Table Tilt (deg.) ..................................................45 right, 10 left......................................45 right, 10 left
Approximate Blade Length (in.)...................................... 158-1/2................................................ 180-1/2
Blade Widths (in.) ......................... 1/4 minimum, 1-1/2 maximum................ 1/4 minimum, 1-1/2 maximum
Switch ........................................................................ magnetic.............................................. magnetic
Dust Collection Minimum CFM Required .............................. 600...................................................... 600
o
Table Height at 90 (in.) .................................................. 35-1/4.................................................. 35-3/8
Floor Space Required (in.) ....................................... 39 x 45-1/2........................................... 39 x 51-1/2
Shipping Weight (lbs.) ......................................................... 970.................................................... 1190
* pre-wired 230 volt NOTE: For 460V operation, magnetic switch (part no. 2013-102B for model 2013;
and part no. 2415-102B for model 2415) must be purchased separately and installed. A qualified
electrician is recommended.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
7