Cisco IOS XR Configuration Manual page 227

Configuring AAA Services on Cisco IOS XR Software
Command or Action (continued)
Step 2
aaa accounting update {newinfo | periodic minutes }
Example:
RP/0/RP0/CPU0:router(config)# aaa accounting
periodic 30
Step 3
end
or
commit
Example:
RP/0/RP0/CPU0:router(config)# end
or
RP/0/RP0/CPU0:router(config)# commit
How to Configure AAA Services
Purpose (continued)
Enables periodic interim accounting records to be
sent to the accounting server.
If the newinfo keyword is used, interim
•
accounting records are sent to the accounting
server every time there is new accounting
information to report. An example of this report
would be when IPCP completes IP address
negotiation with the remote peer. The interim
accounting record includes the negotiated IP
address used by the remote peer.
• When used with the periodic keyword, interim
accounting records are sent periodically as
defined by the argument number. The interim
accounting record contains all the accounting
information recorded for that user up to the time
the interim accounting record is sent.
The periodic keyword causes heavy
Caution
congestion when many users are logged in
to the network.
Saves configuration changes.
When you issue the end command, the system
•
prompts you to commit changes:
Uncommitted changes found, commit them
before exiting(yes/no/cancel)?
[cancel]:
Entering yes saves configuration changes to
–
the running configuration file, exits the
configuration session, and returns the router
to EXEC mode.
– Entering no exits the configuration session
and returns the router to EXEC mode
without committing the configuration
changes.
Entering cancel leaves the router in the
–
current configuration session without exiting
or committing the configuration changes.
Use the commit command to save the
•
configuration changes to the running
configuration file and remain within the
configuration session.
Cisco IOS XR System Security Configuration Guide
SC-215