Cisco IOS XR Configuration Manual page 225

Configuring AAA Services on Cisco IOS XR Software
Command or Action (continued)
Step 3
end
or
commit
Example:
RP/0/RP0/CPU0:router(config)# end
or
RP/0/RP0/CPU0:router(config)# commit
What to Do Next
After configuring method lists, apply those method lists. (See the
Applications" section.)
Purpose (continued)
The stop-only keyword sends a "stop accounting"
•
notice at the end of the requested user process
The none keyword states that no accounting is
•
performed.
The method list itself follows the start-stop keyword.
•
Method list types are entered in the preferred sequence.
The method argument lists the following types:
group tacacs+—Use the list of all configured
–
TACACS+ servers for accounting.
group radius—Use the list of all configured
–
RADIUS servers for accounting.
group group-name—Use a named server group, a
–
subset of TACACS+ or RADIUS servers for
accounting as defined by the aaa group server
tacacs+ or aaa group server radius command.
• The example defines a default command accounting
method list, in which accounting services are provided
by a TACACS+ security server, with a stop-only
restriction.
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
– Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
Entering no exits the configuration session and
–
returns the router to EXEC mode without
committing the configuration changes.
Entering cancel leaves the router in the current
–
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
"Applying Method Lists for
Cisco IOS XR System Security Configuration Guide
How to Configure AAA Services
SC-213