How To Implement Secure Socket Layer; Configuring Secure Socket Layer - Cisco IOS XR Configuration Manual

Implementing Secure Socket Layer on Cisco IOS XR Software
public key indicates that the holder of the private key, the sender, must have created the message. This
process relies on the receiver having a copy of the sender's public key and knowing with a high degree
of certainty that it does belong to the sender and not to someone pretending to be the sender.
Digital certificates provide the link. A digital certificate contains information to identify a user or device,
such as the name, serial number, company, department, or IP address. It also contains a copy of the
entity's public key. The certificate is itself signed by a CA, a third party that is explicitly trusted by the
receiver to validate identities and to create digital certificates.
To validate the signature of the CA, the receiver must first know the CA's public key. Normally, this
process is handled out-of-band or through an operation done at installation. For instance, most web
browsers are configured with the public keys of several CAs by default. Internet Key Exchange (IKE),
an essential component of IPSec, can use digital signatures to scalable authenticate peer devices before
setting up security associations (SAs).
Without digital signatures, a user must manually exchange either public keys or secrets between each
pair of devices that use IPSec to protect communication between them. Without certificates, every new
device added to the network requires a configuration change on every other device with which it
communicates securely. With digital certificates, each device is enrolled with a CA. When two devices
want to communicate, they exchange certificates and digitally sign data to authenticate each other. When
a new device is added to the network, a user simply enrolls that device with a CA, and none of the other
devices needs modification. When the new device attempts an IPSec connection, certificates are
automatically exchanged and the device can be authenticated.

How to Implement Secure Socket Layer

To configure SSL so that it can be used by any application, such as HTTP server or object request broker
(ORB) server, perform the task described in the following section.
•

Configuring Secure Socket Layer

This task explains how to configure SSL.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Configuring Secure Socket Layer, page SC-161
crypto key generate rsa [usage-keys | general-keys] [keypair-label]
configure
domain ipv4 host host-name v4address1 [v4address2...v4address8] [unicast | multicast]
crypto ca trustpoint ca-name
enrollment url CA-URL
end
or
commit
crypto ca authenticate ca-name
crypto ca enroll ca-name
show crypto ca certificates
How to Implement Secure Socket Layer
(required)
Cisco IOS XR System Security Configuration Guide
SC-161