Toshiba GA-1200 Scanning Manual page 25

Multifunctional digital systems
Hide thumbs Also See for GA-1200:
Table of Contents

Advertisement

4. DIRECT TX
Allows transmission direct from the document glass or the document feeder without the use
of memory.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
5. LOW SPEED TX
Used to select a lower transmission speed to transmit a document when poor line conditions
are expected, such as when transmitting to an overseas location that can only accept low
speed data.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
6. ITU MAILBOX
Used for Mailbox Communications or Relay, Transmission with remote Faxes that support
the ITU-T functions.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
7. COVER SHEET
Used to attach a cover sheet to a document to be transmitted.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
8. PRIORITY TX
Sends pages set on the document glass or in the document feeder ahead of all previously
scheduled transmissions.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
9. MULTI
Used to create a manual grouping for multi-address transmission.
P.93 "Multi-address transmission"
10. RECOVERY TX
Recovers from memory and sends incomplete transmissions.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
11. SEND AFTER SCAN
Used to select whether the dialing starts while the equipment is scanning the documents or
after the equipment has scanned all documents to memory.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
12. POLLING
Designates polling communication.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
13. SUB ADDRESS COMM
Adds sub-address digits to the remote Fax number for routing or security.
The Fax Kit (optional, GD-1220) is required.
*
This button is not used in the Scan mode.
Description of Control Panel
23

Advertisement

Table of Contents
loading

Table of Contents