Transmission Errors - Toshiba GA-1200 Scanning Manual

13 APPENDIX

Transmission errors

Error Code
60
61
62
63
71
72
73
74
75
76
7C
7D
A0
134 Error code table
Cause
An error occurred during image data pro-
cessing.
An error occurred during text data pro-
cessing.
Access to the network interface card
was denied.
A sequence error occurred on the USB
interface.
A time-out error occurred during commu-
nication with an SMTP server.
The destination machine responded that
the transmission was an error because
the host name of this equipment (device
name) was invalid.
The Email address of this equipment
("From Address") is not assigned or
includes an invalid letter.
The SMTP server address is not
assigned.
The IP address of this equipment is not
assigned.
The size of data being sent is over the
maximum transmission size.
For sending Emails:
The Email address of the destination is
invalid.
For saving as files:
Invalid entry is found for any of the "Net-
work Path", "Server Name", "Login User
Name" and "Password".
Data transmission failed due to insuffi-
cient memory space.
A system error is detected. If a template
is being used, it is incorrect.
Countermeasure
Turn the power of this equipment OFF and
then back ON. If the error still occurs, con-
tact your service technician or service repre-
sentative.
Check if the network cable is connected cor-
rectly and also the SMTP server is running
correctly.
Refer to the Setup Guide for Scanning
Functions and set the SMTP client cor-
rectly.
Refer to the Setup Guide for Printing
Functions and set the host name of this
equipment correctly.
Refer to the Setup Guide for Scanning
Functions and set the Email address of this
equipment correctly.
Refer to the Setup Guide for Scanning
Functions and assign the SMTP server
address correctly.
Refer to the Setup Guide for Printing
Functions and assign the IP address of this
equipment correctly.
Refer to the Setup Guide for Scanning
Functions and set the value of "Maximum
Email / InternetFax Size" larger. Or reduce
the size of the data by reducing the number
of pages or such.
Refer to "Selecting destinations from
address book" in the Setup Guide for Scan-
ning Functions or "Direct Entry with Digital
Keys" in the P.84 "About Specifying Pro-
cedure of Destinations" and enter the Email
address correctly.
Refer to "Configuring Save as file Settings"
in the Setup Guide for Scanning Func-
tions and set a folder to which the data are
to be saved correctly.
Wait until a job in process is completed, and
then ensure sufficient space in the memory.
If the error still occurs, turn the power of this
equipment OFF and then back ON.
Refer to the Setup Guide for Scanning
Functions and set the corresponding tem-
plate correctly. If the error still occurs, turn
the power of this equipment OFF and then
back ON.