Section 5 - Connecting to a Wireless Network
It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing
network, you will need to know the WEP key being used.
1. Open the Windows
XP Wireless Utility by right-clicking on the wireless
®
computer icon in your system tray (lower-right corner of screen). Select
View.Available.Wireless.Networks.
2. Highlight the wireless network (SSID) you would like to connect to and
click Connect.
D-Link DIR-615 User Manual
Connect to a Wireless Network
Using Windows
XP Through WPA-PSK
®
99