Technical Data (Royal Office) - Saeco Classic Service Manual

ROYAL

5. Technical data (Royal Office)

Power supply/output:
Safety system:
Temperature monitoring:
Continuous flow thermoblock:
Pump:
Safety valve:
Water filter:
Gearmotor:
Gear resistor:
Grinder (conical grinder):
Motor:
Second doser:
Second doser:
Power consumption:
Pump pressure:
Dimensions W x D x H in mm:
Weight:
Capacity of coffee bean container:
Capacity of water tank:
Instantaneous water heater capacity: Approx. 1.0 ccm, 10 ml volume
De-aeration time:
Heating time:
Re-heating time:
Steam heating time:
Coffee dispensing temperature:
Grinding time:
Time to make expresso:
Time to make cup of coffee:
Saeco International Group
Royal Office
Technical data
230V 50Hz 1500W
170°C Safety thermostat for instantaneous water heater
KTY Temperature sensors transmit respective
temperatures to electronic system
Instantaneous water heater (1090 W) for coffee and hot
water dispensing
Ulka reciprocating piston pump with angle connector
and thermostat - 48 W, 230V, 50 Hz., Type EX5
20 l/h
Conventional safety valve connected to pump
Installed in machine in front of the turbine and pump.
Direct current, 30 - 35 V
Approx. 437W / 130
Plastic grinding screw, galvanised steel grinding cone
and grinding disc
260 V Direct current
Coffee dose adjustable by means of lever (6 - 9g) outside
housing
230 V - Magnet coil
No
During heating - approx. 5.7 A
Standby - Approx. 0.04 A
Max. 15 bar
385/450/460
Approx. 14 kg
Approx. 1,000g
Approx. 6 l max.
Approx. 1 - 2 sec. for initial star-up
Approx. 90 sec. with water at 10°C
None due to boiler
From coffee temperature to 127°C - Approx. 50 sec.
Approx. 86° C
Initial grinding with completely empty machine:
Approx. 15 sec. / subsequent grinding: approx. 5.5 sec.
Approx. 28 sec. for 50 ml
Approx. 40 sec. for 100 ml
REV.4 SEPT.2003
2. TECHNICAL DATA
Page 5/5