Fujitsu ScanSnap fi-4110EOX2 Operator's Manual page 46

3 When you have finished the above setting, click the [OK] button.
4 The following screen is displayed, and the new application is added. Click the
[Close] button to close the screen.
Select the application that can be executed on a file of the following specified
format as the application to add.
HINT
JPEG (*.jpg), PDF (*.pdf)
Scanned images cannot be displayed properly unless these file formats are
supported.
This can be confirmed by the following method:
<Example: to confirm whether or not the application to add can be executed on
a specified a JPEG format file>
1. Create a shortcut for the application you want to add.
2. Drag-and-drop any file in JPEG format (*.jpg) on top of the shortcut.
⇒
If the application starts up and the file opens, then this means that
JPEG format files can be run.
<To remove an application>
1 Select the application you want to remove in the "Add or remove application"
screen, and click the [Remove] button.
2 The confirmation screen will be displayed twice. In either case, click the [Yes] but-
ton.
3 Confirm that the application has been removed, and then click the [Close] button.
<To change settings>
1 Select the application whose settings you want to change in the "Add or remove
application" screen, and click the [Change...] button.
2 The "Additional Application Settings" screen is dislpayed. Change the desired
items.
3 When you have finished the above setting, click the [OK] button.
4 The "Add or remove application" screen is displayed, and the settings are changed.
Click the [Close] button to close the screen.
ScanSnap! fi-4110EOX2 Operator's Guide
3.5 Changing Scan Settings
3
31