Table of Contents
Advertisement
run a wash cycle with no laundry in the machine
Sorting and loading laundry
Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe important information!
Wash laundry of different sizes in the same wash programme.
Take care not to trap items of laundry between the washing machine door and seal.
Add detergent and care products
amount of laundry, soiling, water hardness (ask your water supply company) and
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
ditional functions
Start /
Reload
lect the temperature ( = cold)
lect the spin speed (* depending on the model) or
n, laundry soaks in the last rinsing water, display panel - - - )
d of programme after ...
ogramme sequence displays:
ash, rinse, spin, programme duration or end (-0-)
ildproof lock
page 5
en the washing machine door, reload laundry
pages 4, 5
Before the first wash,
Page 9.
Page 7.
Page 6
Close the door.
Measure detergent according:
manufacturer's instructions.
1
**If the
symbol flashes in the
display panel, the childproof lock is
active
Deactivate childproof lock,
page 5.
Additional functions and option
buttons
Individual settings,
page 5.
2
Press
(Start/Reload)
All buttons are sensitive and need
only to be touched lightly. Press and
hold the
(h) (Ready in) option
button for an automatic run through
all setting options.
(without final
Washing
Detergent drawer with
compartments I, II,
Drum
Control panel
Door
Service door
Washing
3
3
3
Removing the washing
Open the washing machine door and remove the washing.
If
(without final spin) is active: turn the programme selector to
(Empty) or select the spin speed.
Choose
(Start/Reload).
– Remove any foreign objects. Risk of rusting.
– Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models
Refer to Installation instructions.
Switching off
o
Turn the programme selector to
(stop).
End of programme when ...
...
(Start/Reload) flashes and -
- appears on the display panel.
Note: If display panel lighting is switched off, press any button
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select
(Rinse)/
(Spin).
– Press
(Start/Reload).
Programmes at lower temperatures:
– Select
(Rinse)/ (Spin) (deactivate extra
or
(Empty).
– Press
(Start/Reload).
Changing the programme if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press
(Start/Reload). The new programme starts from the
beginning.
Reloading laundry if ...
... Press
(Start/Reload); both the symbols
the display panel. If
is lit, the washing machine door cannot be opened.
Press
(Start/Reload).
Energy
(Extra rinse) button)
page 5
+
are displayed on
4
4
4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Washing Machine and is the answer not in the manual?
Questions and answers
The lock is on , cant start' it is bíbing picture lock and 1. hour
The BALAY washing machine may have the childproof lock activated. To unlock it, press and hold the additional function button labeled with a "key" symbol or “+ rápido” for about five seconds. This should deactivate the childproof lock and allow normal operation.
This answer is automatically generated
How can i unlock the wachinemacine
To unlock a Balay washing machine, follow these steps:
1. Check if the spin button (with an upward-pointing arrow) is pressed.
2. If it is pressed, release it and wait a few minutes.
3. If the door does not open immediately, wait a little longer, as the machine locks for a short time after operation.
This procedure may not apply to all Balay models.
This answer is automatically generated
How long is washing cycle
The washing cycle durations for the Balay 3TS70105T washing machine are:
- Cotton 40°C: 2 hours 25 minutes
- Cotton 60°C: 2 hours 40 minutes
- Easy-Care 40°C: 1 hour 15 minutes
- Delicate Cold: 44 minutes
- Wool 30°C: 53 minutes
This answer is automatically generated
Can't open the door after washing is finished
If the door of your BALAY washing machine cannot be opened after the wash cycle is finished, it may be because the childproof lock is activated or the machine has not fully drained. Check the display panel for any lock symbols or indicators. If the machine is still full of water, a blockage may be preventing drainage. Press the Start/Reload button to see if the door unlocks.
This answer is automatically generated
I have a Balay auto silencio washing machine and the drawer warning light is showing. It’s not recognising that the drawer is in. I have cleaned it all and refilled it but still the same
If the drawer warning light is showing on a Balay Auto Silencio washing machine and it does not recognize that the drawer is in, remove the detergent drawer completely and then slide the insert forward and click it into place. Ensure the insert is correctly positioned, especially if using gel detergents or washing powder.
This answer is automatically generated
I have done as advised but the drawer light is still flashing. Anymore advice would be great, thankyou
I have done as advised but the light is still flashing. Anymore advice would be greatly appreciated
What is the symbol Flot for?
The "Flot" symbol on a BALAY washing machine refers to a function that keeps clothes floating in water after the final rinse. This prevents them from getting creased if you are not there to remove them immediately when the cycle ends.
This answer is automatically generated
how long is each programme?