Canon FAX-L380 User Manual page 134

Message
LOAD A4 SIZE PAPER
MEM IN USE nn %
MEMORY FULL
PRESS OK KEY
NOT REGISTERED
PRINTER DATA ERROR
REC. PAPER JAM
RECEIVED IN MEMORY
REMOVE MP PAPER
SCANNING
13
MAKING SPACE IN MEM
PLEASE WAIT
START AGAIN
LCD Messages
13-8
Cause
No A4-size paper is loaded in the
cassette or multi-purpose feeder.
Shows the percentage of memory
currently in use. This message is
displayed when you set the document in
ADF.
The memory is full because collate copy
was set when a large document is loaded.
The One-Touch Speed Dial button or
Coded Speed dialing code you entered
has not been registered.
Abnormality has occurred in the data
transmission between the machine and
computer.
There is a paper jam.
The machine received the fax in memory
because paper or toner ran out, a paper
jam occurred, or incorrect paper size was
loaded.
Paper is loaded in the multi-purpose
feeder.
Memory is getting low during scanning
because the document has many
graphics or photos.
The paper in the cassette has run out, the
toner has run out, paper jams have
occurred, or the paper size setting is
wrong while the report is printing.
Action
Load A4-size paper in the cassette or
multi-purpose feeder. (See pages 2-20 to
2-22, or pages 4-8 to 4-10.)
Wait for the machine to send any faxes in
memory. Also, print or delete any
documents in memory you no longer
need.
Divide the document and copy each part
separately.
If <MEMORY FULL> and <PRESS OK
KEY> appear while scanning documents
using the ADF, the document being
scanned stops in the ADF. In this case,
press [OK] to make the document come
out automatically.
Register the One-Touch Speed Dial
button or Coded Speed Dialing code.
(See pages 5-2 and 5-5.)
Use [System Monitor] to delete the
current print job or the final print job (If
multiple jobs are being printed). Then you
can shift to the next job. If you use
<PRINTER RESET> of the Menu, all the
print jobs are deleted. (See 15-14.)
Clear the paper jam (See pages 13-1 to
13-6.) and reload paper in the cassette or
multi-purpose feeder. Then reset the
machine by opening the printer cover and
then closing it.
Load correct paper size in the cassette,
replace the cartridge, or clear the paper
jam. (See p. 7-6.)
Remove the paper from the multi-purpose
feeder. If the machine receives the fax
then paper is loaded in the multi-purpose
feeder, the received document will be
stored in memory.
When memory space becomes available
as printing continues, the scanning
resumes automatically.
Then reset the machine by opening the
printer cover and then closing it.
After loading paper in the cassette,
replacing the cartridge, clearing jams, or
specifying the correct paper size, print the
report again.