transmission (1) to the external display, though at the same time it
accepts the external power supply(2).
Connect the monocular to an external video display/recorder and to
an external power supply as follows:
1. remove the batteries.
2. remove the protective cap from the connector socket.
3. Attach the video cable to the oTS output connector socket.
4. Attach the RCA plug of the video cable to a compatible jack
on an external video display/recorder, or extension cable.
5. Attach the power jack socket of the cable to a 6 vDC/ 1 A
power supply.
WARNING
When the unit is to be powered with external sources, first make
sure the batteries have been taken out.
2
1
Figure 2-3. Attaching Video Cable
2-5