Decryption - Yealink SIP-T22P User Manual

Enterprise IP Phone
The parameters of the Auto-provision：
Parameter
Update Protocol
TFTP Server
Check new config
Scheduling
Note:
1. Any power interruption during the following process will most likely lead to a flash
memory error. As a result the system cannot boot up anymore. The procedure can
be only conducted in Administrator Mode.
2. If the updating is failed, you can re-plug the power adaptor, and press the Speaker
key for 3 seconds, the IP phone will enter the account configuration interface. Users
can reconfigure the IP phone account information here, and then press the OK
button to save the changes.

Decryption

This IP phone can support y000000.cfg and mac.cfg files encryption and decryption for
user authentication to realize s ecurity usage. If there are any encrypted y000000.cfg or
mac.cfg files on the server, users can open the webpage of your IP phone.
Go to Upgrade->Advanced, choose and fill in the Specified AES Key (for y000000.cfg)
and Per-phone AES Key (for mac.cfg) option, then click the Confirm button to
decryption the files and upgrade to the new version. Shown as below:
The phone can be updated via TFTP, FTP or HTTP
If you choose TFTP as protocol TFTP, you need to enter the TFTP
server IP address and port
You can specific the period that your phone checks the new
firmware from the server: Power on, Scheduling, Disable and
both.
You can specific the period in days which the phone checks and
updates the new firmware, the range is 1-30 days
Using the Advanced Phone Functions
Description
- 36 -