Remote Controller - Marantz SR3053 User Manual

NAMES AND FUNCTIONS

REMOTE CONTROLLER

The provided remote controller is a system remote
controller. The POWER button, numeric buttons
and control buttons are used in common across
different input source components.
The input source controlled with the remote
controller changes when one of the input selector
buttons is pressed.
¤9
¤8
¤7
¤6
¤5
¤4
¤3
¤2
¤1
¤0
6
z POWER ON and OFF buttons
(When AMP mode is selected)
These buttons are used to turn the unit on or off.
x I /
SOURCE button
This button is used to turn a specifi c source (such
as a DVD player) on or off independently from the
rest of the system.
c SOURCE buttons
These buttons are used to switch the source of your
z
A/V Receiver. To change the A/V Receiver source,
x
press this button twice within two seconds. The
signal is sent when it is pressed the second time.
c
Each time a source button is pressed, the control
v
mode of this remote controller is changed to the
source which was pressed.
b
This remote controller can control 6 types of
Marantz AV equipment.
n
Notes
m
• Select the AMP as the source to use this remote
,
controller with the unit.
.
⁄0
v 5.1 CH IN button
⁄1
Press when selecting or canceling 5.1CH input.
⁄2
⁄3 b MUTE button
This button is used to mute the audio for the
⁄4
amplifi er.
⁄5
⁄6
n VOLUME +/– buttons
⁄7
These buttons are used to adjust the volume for
⁄8
the amplifi er.
⁄9
m NIGHT button
Pressing this button prevents the Dolby Digital
signal from playback at a loud voice.
, STEREO button
This button is used to select STEREO mode.
. S.DIRECT button
This button is used to select SOURCE DIRECT
mode.
⁄0 AUTO button
This button is used to select auto surround.
⁄1 SURROUND button
Each press of this button will switch among
Surround modes.
⁄2 INFO button
This button is used to display the INFORMATION for
DVD and other device.
⁄3 EXIT button
(When AMP mode is selected)
This button is used to cancel setting in the setup
menu.
⁄4 CONTROL buttons
These buttons are used when operating PLAY,
STOP, PAUSE and other commands of a source.
(When TUNER mode is selected)
BAND button
This button is used to select a radio band.
T.MODE button
This button is used to select auto stereo mode or
mono mode when the FM band is selected.
P.SCAN button
This button is used to start preset scan.
⁄5 BASS +/– buttons
(When AMP mode is selected)
These buttons are used to adjust the level of low
frequency sound.
⁄6 TREBLE +/– buttons
(When AMP mode is selected)
These buttons are used to adjust the level of high
frequency sound.
⁄7 MEMO button
(When tuner mode is selected)
This button is used to store the setting of preset
channel and others.
⁄8 CLEAR button
This button is used to erase the memory or program
of a source include the Tuner mode.
⁄9 SPK SETTING buttons
LEVEL button
This button is used to call up SPK LEVEL.
DISTANCE button
This button is used to call up SPK DISTANCE.
SIZE button
This button is used to call up SPK SIZE.
¤0 SLEEP button
This button is used for setting the sleep timer.
¤1 DISPLAY button
(When AMP mode is selected)
This button is used to selects the display mode for
the front display of the unit.
¤2 T.TONE button
This button is used to enter the test tone menu.
¤3 MENU button
(When AMP mode is selected)
This button is used to call up the SETUP MAIN
MENU of the unit.