Connecting Hdmi Components - Marantz SR3053 User Manual

CONNECTING HDMI COMPONENTS

HDMI JACK
This unit has 2 HDMI inputs and one HDMI output. There is only a pass-through mode in HDMI of this unit.
This unit does not support HDMI repeater. So, the sound of HDMI audio is not output from the speaker as
this unit.
When output the sound from the Blu-ray and DVD sources that connects HDMI cable with this unit, a
separate audio cable (coax digital or analog) is needed for the audio signals.
Notes
• When the HDMI output is connected to a display monitor that does not support HDCP*, signals are not output.
To view images in HDMI, it is necessary to connect to a display that supports HDCP*.
• There may be no image output if connected to a TV or display that is not compatible with the above format.
• Refer to the instruction manual of the TV or display to be connected to the unit for detailed information
regarding the HDMI terminal.
* HDCP: High-bandwidth Digital Content Protection
DVD player
DIGITAL HDMI
OUTPUT OUTPUT
VIDEO VIDEO
GND GND
VCR VCR DVD DVD BLU-RAY BLU-RAY
FM( ( 75 FM 75Ω Ω ) )
AM AM
L L
ANTENNA ANTENNA
R R
CD / / TAPE CD TAPE VCR VCR DVD DVD BLU-RAY BLU-RAY
IN IN OUT OUT IN IN OUT OUT IN IN IN IN
ANALOG AUDIO ANALOG AUDIO
DVD DVD DVD DVD MONITOR OUT MONITOR OUT MONITOR OUT MONITOR OUT BLU-RAY BLU-RAY BLU-RAY BLU-RAY
L L SL SL C C SUB SUB
WOOFER WOOFER
R R L L
R R SR SR SW SW
SURROUND SURROUND CENTER CENTER
5.1CH INPUT 5.1CH INPUT PRE OUT PRE OUT SPEAKER SYSTEMS : 6-8 OHMS SPEAKER SYSTEMS : 6-8 OHMS
Blu-ray disc player
STANDBY
POWER ON/OFF
DIGITAL HDMI
OUTPUT OUTPUT
Video projector
HDMI
INPUT
Y Y
COAXIAL COAXIAL COAXIAL COAXIAL
DVD DVD DVD DVD
OPTICAL OPTICAL P P B B
IN IN
C C B B
P P R R
OUT OUT
C C R R
MONITOR MONITOR CD CD BLU-RAY BLU-RAY BLU-RAY BLU-RAY DVD DVD BLU-RAY BLU-RAY MONITOR MONITOR
OUT OUT OUT OUT REMOTE REMOTE
DIGITAL AUDIO IN DIGITAL AUDIO IN DIGITAL AUDIO IN DIGITAL AUDIO IN COMPONENT VIDEO COMPONENT VIDEO CONTROL CONTROL
MODEL NO. SR3053 MODEL NO. SR3053
AC IN AC IN
R R L L
FRONT FRONT
CONNECTING HDMI COMPONENTS
An HDMI cable (sold separately) is used to connect
the HDMI jack on the unit with the HDMI jack
on a Blu-ray disc player, TV, projector or other
component.
HDMI video streaming is compatible with DVI in
principle. Therefore, it is possible to connect to a TV
or monitor that has a DVI terminal using an HDMI-
DVI conversion cable or plug. When connecting to a
DVI terminal, connect the audio signal separately.
Notes
• Some HDMI components can be controlled over
the HDMI cable, but this unit cannot control other
components this way.
• When connected to a monitor (i.e., TV, projector,
etc.) that does not support HDCP, video and
audio are not output.
• DVI cables come with 24-pin and 29-pin plugs.
This unit supports 24-pin DVI-D cables; 29-pin
DVI cables cannot connect to it.
• When multiple components are connected to this
unit, turn power to unused components off to
prevent interference between them.
• Disconnecting or connecting cables with the
power on can damage the equipment. Turn the
power off before disconnecting or connecting
cables.
• If the DVD player or other device with DVI output
is connected to the unit, a separate audio cable
(optical-digital, coaxial digital or analog) is
needed for the audio signals.
• Depending on the quality of the cable used, the
HDMI signal may be affected by noise.
BASIC CONNECTIONS
11